TUTORIAL Cómo instalar ROM CM12.1 en Emax Mini (PROCEDIMIENTO)

Breakk

Diamante
Cocinero
Corazón DualSIM
Mensajes
11.946
Puntos
10.430
Móvil
UMI IRON
Hola a todos.

Lo prometido es deuda. Gracias al foro Umi , me han pasado un pdf con la información y el proceso para poder instalar con éxito CM12 en el emax mini.

El pdf del proceso completo lo podéis descargar de aquí:

UMI eMAX mini CM12.1 Flash methods.docx

Que conste que yo no he podido probarlo en el emax mini de @rareipe que tengo todavia en mi poder y estoy esperando a instalar CM para poder devolverselo a él.

Yo no me hago responsable de lo que pone en el tutorial , pues yo no lo he creado, y no he podido probarlo. Y tampoco de los posibles blinkeos de terminales.

Seguro que los mas atrevidos os metéis en faena , asi que ya me iréis comentando si funciona o no.

Un saludo,

@Breakk
 
Última edición:
Os lo pongo aqui, por si alguien no lo puede abrir:



How to flash CM12.1 of EMAX MINI?

<1> Install Driver

1. Insert USB cable, in Dial-up interface input “###2324#”to open COM Port, make sure you can see the COM Port in your computer

upload_2016-1-13_19-22-45.png



PS: To process below any step if you can not turn off phone, pls press volum up (+) and power button to turn it off.


2. If still didn’t show COM Port, pls continue input “*#*#564548#*#*” in your phone to open USB Debugging, then the computer will show the COM Port, like below

upload_2016-1-13_19-23-9.png



3. Download the Driver first: TCL_Q39_New_Qualcomm_Driver_8936_20150414.rar

Press volume buttons (both“+”and“-”) after the mobile phone being turn off.

Insert the data cable and release the buttons after the following red interface pops up

Hold volume button (+) again until the mobile phone’s screen turn black

Release the volume button again; the phone is already in downloading mode. Port 9008 will appear in the computer. (as the following picture)

If failed to get 9008 COM Port, pls try to remove the USB cable and repeat this step again

upload_2016-1-13_19-23-38.png


upload_2016-1-13_19-23-58.png



4. When computer show out “Other equipment”, Right click “Android” and choose “Update driver software”


upload_2016-1-13_19-24-55.png


Then click “choose from the list of device driver”

upload_2016-1-13_19-25-15.png




Chick “Next”
upload_2016-1-13_19-25-48.png



Click “Install from disk”
upload_2016-1-13_19-26-7.png



Click “browse” to open the driver file (pls attention 64-bit or 32-bit)
upload_2016-1-13_19-26-27.png



Choose “qcmdm.inf” to install driver, then succeed
upload_2016-1-13_19-26-48.png




Attention:

If failed to install driver, pls restart computer then continue to print “F8”, once Advanced options comes out, pls choose “Disable driver enforcement”, then restart computer and try to install driver again
upload_2016-1-13_19-27-13.png




<2> Backup QCN File (while you flash the ROM and no signal, need this File to restore signal)

after you succeed to install driver, the correct COM Port should be 9091

Install QPST2.7.0437: QPST.WIN.2.7 Installer-00437.zip


Then open QPST, choose QFIL, then click “Tools”, then choose “QCN Tools backup”

upload_2016-1-13_19-27-35.png



<3> Flash tool update

After succeed to install driver and backup QCN, pls use QFIL from QPST to update phone:

Q39_zhongxing_20150717.zip


Pls make sure the COM Port should be 9008

Open Menu->QPST->QFIL

Phone power off, remove USB cable, hold volume buttons (both“+”and“-”),

Insert the data cable and release the buttons after the red interface pops up;

Hold volume button (+) again until the mobile phone’s screen turn black

Release the volume button again; the phone is already in downloading mode.

Port 9008 will appear in the QFIL, if can not be identify 9008, pls click “select port”

upload_2016-1-13_19-27-57.png


upload_2016-1-13_19-28-16.png



Start to flash phone:

1. Choose Flad Build in Select build type

2. Click Browse, and choose “prog_emmc_firehose_8936.mbn” , then click search patch

3. Click Load XML , and choose “rawprogram0_unsparse.xml” , and continue to choose “rawprogram0.xml”

4. Click “Download” to start
upload_2016-1-13_19-28-36.png



Then you succeed to flash the ROM

upload_2016-1-13_19-28-57.png



<4> Restore QCN

After flash, need to use QFIL to restore QCN,

Open menu->tools->QCN backup restore

Click Browse and select the file you backup one, then restore

If you miss or fail to backup QCN, here is the QCN you can download:00000000(1116).qcn

upload_2016-1-13_19-29-16.png




<5> Flash TWRP Recovery

Install TWRP: 么么哒3S TWRP中文.exe

Phone power on, open USB Debugging, open “TWRP RECOERY.EXE”, computer will flash automatic, and images as below,

upload_2016-1-13_19-29-36.png


The recovery of phone is TWRP, shutdown the phone now and then press volume up(+) and power button, after white interface pops up, pls change to press volume up(+), it will log in TWRP recovery interface after almost 5’s, then TWRP recovery succeed as below images

upload_2016-1-13_19-29-56.png




<6> SD Card flash(once you finish this Card flash, the ROOT Limits will bring to your phone, then you can feel free to flash other ROM in ROOTJOY)

After flash TWRP Recovery succeed, download CM12.1: emax_mini_cm12.1_gapps_20150916.zip

Save in TF Card, shutdown the phone, press volume up(+) and power button, after white interface pops up, pls change to press volume up(+), it will log in TWRP recovery interface after almost 5’s,

Install CM12.1 ROM, choose the ROM from SD Card, after succeed, return to home page and restart phone

upload_2016-1-13_19-30-17.png
 
Última edición:
El procedimiento es el mismo que publiqué en el tutorial TUTORIAL - Convertir eMAX Mini a TCL M3G 3S para usar roms TCL M3G el 28 de Diciembre, pero usando una herramienta distinta y un modo distinto de poner el móvil en diagnóstico. Ni lo prometido es deuda ni nada por el estilo, lo único que hacen es lo mismo que lo que veníamos haciendo, convertir el emax mini a un TCL M3G y flashear una ROM del M3G con dos cambios en el build.prop para que ponga eMAX Mini.
Desde luego, espero que sigan trabajando en el tema rootjoy/roms flasheables en el eMAX Mini, porque esto no es ni lo prometido, ni presentable.
Edito: ojo, que no me parece mal que den alternativas, pero esto no es el soporte que se espera.
 
El procedimiento es el mismo que publiqué en el tutorial TUTORIAL - Convertir eMAX Mini a TCL M3G 3S para usar roms TCL M3G el 28 de Diciembre, pero usando una herramienta distinta y un modo distinto de poner el móvil en diagnóstico. Ni lo prometido es deuda ni nada por el estilo, lo único que hacen es lo mismo que lo que veníamos haciendo, convertir el emax mini a un TCL M3G y flashear una ROM del M3G con dos cambios en el build.prop para que ponga eMAX Mini.
Desde luego, espero que sigan trabajando en el tema rootjoy/roms flasheables en el eMAX Mini, porque esto no es ni lo prometido, ni presentable.
Edito: ojo, que no me parece mal que den alternativas, pero esto no es el soporte que se espera.
Lo de la frase: ' lo prometo es deuda' , es referente a mi. Yo dije que pedi a umi que me dijeran el modo o como se instala y eso es lo que he hecho. Me han pasado la información y yo la he publicado en el foro.

Y además ya comenté que estaban trabajando para poder poner la rom CM12.1 a través de Rootjoy.


Enviado desde mi IRON mediante Tapatalk
 

Del blog

Es tendencia

¿Ha terminado la locura de añadir tantas cámaras a los móviles?

  • Si

  • No

  • No lo se

  • Ya me gustaría...

  • Ya te gustaría...


Los resultados solo son visibles tras votar.
Atrás
Arriba