Lo he metido a "manopla". Espero que sirva a todos y que un Ingeniero nos lo "traduzca"...
Menú Modo de Ingeniero (M.I.) para MT 6235 y *#3646633#
1.- Network Setting: Network Info.(Sel Celda RR, Dscr can RR, Ctrl can RR, Ctrl RACH RR, Info LAI RR, Enlace de radio, RR, Rep med RR, Info can CC, Info llamada CC, CA List Info, PLMN Info)
2.- Dispositivo
2.1 - LCD:
2.1.1 - LCD Principal
2.1.1.1 - Definir contraste
2.1.1.2 - Definir relación de des..
2.1.1.3 - Definir tasa de línea
2.1.1.4 - Definir temperatura
2.1.1.5 - Set Color
2.1.1.6 - Display Demo Pic.
2.2 - GPIO
2.2.1 - Mostrar GPO/GPIO
2.2.2 - Editor GPIO
2.2.3 - Editor GPO
2.3 - PWM: (PWM 1, PWM 2, PWM 3)
2.4 - EINT
2.4.1 - EINT0_ACC_DET 0
2.4.2 - Battery TEMP 0
2.5 - ADC
2.5.1 - Battery Temp 74.22C
2.5.2 - Accessary DET 0.02V
2.5.3 - Visense 0.01 (que oscila hasta 0.03 A)
2.5.4 - VBAT 3.91 (que oscila hasta 3.92 V)
2.6 - Definir nivel predeterminado
2.6.1 - Contraste de Main LCD
2.6.2 - Batería
2.6.3 - PWM 1
2.6.4 - PWM 2
2.6.5 - PWM 3
2.7 - Definir UART
2.7.1 - UART Setting
2.7.2 - UART Power ON/OFF
2.8 - Modo de sueño: (Activar o desactivar)
2.9 - DCM Mode: (Activar o desactivar)
2.10 - FM Radio (MONO, STEREO, RSSI, IF Count Delta, RSSI Info.
2.11 - RTC XOSC (WO): (Por defecto está en 0)
2.12 - MT6238PMU
2.12.1 - Register Setting: (Por defecto está en 0)
2.12.2 - Charger Status: (CHRDET, BAT_ON, CV, CHR_OVP, CHARGING)
2.12.3 - Set Charger: (CHR Enable, CHR Current, Current offset, OV Th-Freeze, CV threshold)
2.12.4 - Driver: (Vibrator, LED)(Apagar o encender)
2.12.5 - LDO Voltage Sel. (VMC_SEL, VCAMERA_SEL, VSW_A_SEL, VSIM2_SEL)
2.12.6 - LDO Voltage Calibration: (VFBADJ_CAL, VFBADJ_SLEEP_CAL, VRF_CAL, VM_CAL, VIO_CAL, VA_CAL, VCTXO_CAL, VSIM_CAL, VRTC_STEP1_CAL, VRTC_STEP2_CAL, VUSB_CAL,VMC_CAL, VCAMERA_CAL, VSW_A_CAL, VSIM2_CAL)
2.12.7 - LDO Enable: (VRF_ON_SEL, VRF_EN, VCTXO_ON_SEL, VCTXO_EN, VUSB, VMC_EN, VCAMERA_EN, VSW_A_EN, VSIM1, VSIM2)
2.12.8 - DC-DC Control: (GAIN_P, GAIN, GAIN_D, DIRECT_CTRL_EN, DCV_CK_SEL, ISEL, ADJKSEL, MODESET, MODEEN, PFMSEL[0:3], PFMSEL[4:6], IASEL, SLEW_CTRL)
2.12.9 - BIAS CURRENT: (VRF, VM, VIO, VA, VTXCO, VSIM, VUSB, VMC, VCAMERA, VSW_A, VSIM2)
3.- Audio
3.1 - Definir tono: (Modo normal, modo altavoz o modo auricular)
3.2 - Modo normal:
3.2.1 - FIR: (del 0 al 5)
3.2.2 - Voz: (0 al 16)
3.2.3 - Tono teclas: (0 al 16)
3.2.4 - Melodía: (0 al 16)
3.2.5 - Radio FM: (0 al 16)
3.2.6 - Micrófono: (0 al 16
3.2.7 - Tono lateral: (Definir, por defecto está en 32)
3.3 - Modo altavoz
3.3.1 - Voz: (0 al 16)
3.3.2 - Tono teclas: (0 al 16)
3.3.3 - Melodía: (0 al 16)
3.3.4 - Radio FM: (0 al 16)
3.3.5 - Micrófono: (0 al 16
3.3.6 - Tono lateral: (Definir, por defecto está en 32)
3.4 - Modo auricular
3.4.1 - Voz: (0 al 16)
3.4.2 - Tono teclas: (0 al 16)
3.4.3 - Melodía: (0 al 16)
3.4.4 - Radio FM: (0 al 16)
3.4.5 - Micrófono: (0 al 16
3.4.6 - Tono lateral: (Definir, por defecto está en 32)
3.5 - Tono de llamada (IMY:0 al 10, MIDI:0 al 10, SOUND: 0 al 9)
3.6 - Mejora de voz
3.6.1 - Parámetros comunes
3.6.2 - Modo normal
3.6.3 - Modo auricular
3.6.4 - Modo altavoz
3.6.5 - Modo de auricular BT
3.6.6 - Modo inalámbrico BT
3.6.7 - Modo AUX 1
3.6.8 - Modo AUX 2
3.6.9 - Modo AUX 3
3.7 - Balanceo max.(Por defecto 12800) (Borrar o Aceptar). Si sales, sales totalmente del M.I.
3.8 - Debug Info.: (Del 0 al 15)
3.9 - Auto Record Setting
4.- GPRS Act
4.1 - Adjuntar
4.2 - 1st PDP
4.3 - 2nd PDP
5.- Misc.
5.1 - Respuesta automática
5.2 - RAM Test
5.3 - Memory Dump
5.4 - MMI Debug
5.5 - AMR
5.6 - Internet Application
5.7 - J2ME TCK
5.8 - Touch Screen
5.9 - Fixed Gain for Helios2
6.- Auto Test List
6.1 - Version (Add from list, Change priority, Remove)
6.2 - BackLight (Add from list, Change priority, Remove)
6.3 - LCD (Add from list, Change priority, Remove)
6.4 - KeyPad (Add from list, Change priority, Remove)
6.5 - Receiver (Add from list, Change priority, Remove)
6.6 - Mic (Add from list, Change priority, Remove)
6.7 - Speaker (Add from list, Change priority, Remove)
6.8 - Headset (Add from list, Change priority, Remove)
6.9 - Battery (Add from list, Change priority, Remove)
6.10 - Melody (Add from list, Change priority, Remove)
6.11 - Vibrator (Add from list, Change priority, Remove)
6.12 - Charger (Add from list, Change priority, Remove)
6.13 - Back Camera (Add from list, Change priority, Remove)
6.14 - Front Camera (Add from list, Change priority, Remove)
6.15 - Memory Card (Add from list, Change priority, Remove)
6.16 - Parallel Line (Add from list, Change priority, Remove)
7.- Debug Info
7.1 - Last Exception
8.- Bluetooth
8.1 - General Test:
8.1.1 Start Testing
8.1.2 Add Audio Conn
8.1.3 Remove Audio Conn
8.1.4 Far End Lookback
8.1.5 Exit Test Mode)
8.2 - Bluetooth RF Test
8.3 - Get Chip Version
8.4 - Bluetooth UPF Test
9.- Profiling
9.1 - Memory Monitor (Apagar o encender)
9.2 - Memory Statistic: (En mi caso pone lo siguiente, que no entiendo...)
*app-asm*: pool size:717376, max caller id:0, max alloc size:0
*scr-asm*: pool size:619460, max caller id:19681, max alloc size:6624
10.- RF Test Tool
10.1 - GSM
10.2 - Wifi
Menú Modo de Ingeniero (M.I.) para MT 6235 y *#3646633#
1.- Network Setting: Network Info.(Sel Celda RR, Dscr can RR, Ctrl can RR, Ctrl RACH RR, Info LAI RR, Enlace de radio, RR, Rep med RR, Info can CC, Info llamada CC, CA List Info, PLMN Info)
2.- Dispositivo
2.1 - LCD:
2.1.1 - LCD Principal
2.1.1.1 - Definir contraste
2.1.1.2 - Definir relación de des..
2.1.1.3 - Definir tasa de línea
2.1.1.4 - Definir temperatura
2.1.1.5 - Set Color
2.1.1.6 - Display Demo Pic.
2.2 - GPIO
2.2.1 - Mostrar GPO/GPIO
2.2.2 - Editor GPIO
2.2.3 - Editor GPO
2.3 - PWM: (PWM 1, PWM 2, PWM 3)
2.4 - EINT
2.4.1 - EINT0_ACC_DET 0
2.4.2 - Battery TEMP 0
2.5 - ADC
2.5.1 - Battery Temp 74.22C
2.5.2 - Accessary DET 0.02V
2.5.3 - Visense 0.01 (que oscila hasta 0.03 A)
2.5.4 - VBAT 3.91 (que oscila hasta 3.92 V)
2.6 - Definir nivel predeterminado
2.6.1 - Contraste de Main LCD
2.6.2 - Batería
2.6.3 - PWM 1
2.6.4 - PWM 2
2.6.5 - PWM 3
2.7 - Definir UART
2.7.1 - UART Setting
2.7.2 - UART Power ON/OFF
2.8 - Modo de sueño: (Activar o desactivar)
2.9 - DCM Mode: (Activar o desactivar)
2.10 - FM Radio (MONO, STEREO, RSSI, IF Count Delta, RSSI Info.
2.11 - RTC XOSC (WO): (Por defecto está en 0)
2.12 - MT6238PMU
2.12.1 - Register Setting: (Por defecto está en 0)
2.12.2 - Charger Status: (CHRDET, BAT_ON, CV, CHR_OVP, CHARGING)
2.12.3 - Set Charger: (CHR Enable, CHR Current, Current offset, OV Th-Freeze, CV threshold)
2.12.4 - Driver: (Vibrator, LED)(Apagar o encender)
2.12.5 - LDO Voltage Sel. (VMC_SEL, VCAMERA_SEL, VSW_A_SEL, VSIM2_SEL)
2.12.6 - LDO Voltage Calibration: (VFBADJ_CAL, VFBADJ_SLEEP_CAL, VRF_CAL, VM_CAL, VIO_CAL, VA_CAL, VCTXO_CAL, VSIM_CAL, VRTC_STEP1_CAL, VRTC_STEP2_CAL, VUSB_CAL,VMC_CAL, VCAMERA_CAL, VSW_A_CAL, VSIM2_CAL)
2.12.7 - LDO Enable: (VRF_ON_SEL, VRF_EN, VCTXO_ON_SEL, VCTXO_EN, VUSB, VMC_EN, VCAMERA_EN, VSW_A_EN, VSIM1, VSIM2)
2.12.8 - DC-DC Control: (GAIN_P, GAIN, GAIN_D, DIRECT_CTRL_EN, DCV_CK_SEL, ISEL, ADJKSEL, MODESET, MODEEN, PFMSEL[0:3], PFMSEL[4:6], IASEL, SLEW_CTRL)
2.12.9 - BIAS CURRENT: (VRF, VM, VIO, VA, VTXCO, VSIM, VUSB, VMC, VCAMERA, VSW_A, VSIM2)
3.- Audio
3.1 - Definir tono: (Modo normal, modo altavoz o modo auricular)
3.2 - Modo normal:
3.2.1 - FIR: (del 0 al 5)
3.2.2 - Voz: (0 al 16)
3.2.3 - Tono teclas: (0 al 16)
3.2.4 - Melodía: (0 al 16)
3.2.5 - Radio FM: (0 al 16)
3.2.6 - Micrófono: (0 al 16
3.2.7 - Tono lateral: (Definir, por defecto está en 32)
3.3 - Modo altavoz
3.3.1 - Voz: (0 al 16)
3.3.2 - Tono teclas: (0 al 16)
3.3.3 - Melodía: (0 al 16)
3.3.4 - Radio FM: (0 al 16)
3.3.5 - Micrófono: (0 al 16
3.3.6 - Tono lateral: (Definir, por defecto está en 32)
3.4 - Modo auricular
3.4.1 - Voz: (0 al 16)
3.4.2 - Tono teclas: (0 al 16)
3.4.3 - Melodía: (0 al 16)
3.4.4 - Radio FM: (0 al 16)
3.4.5 - Micrófono: (0 al 16
3.4.6 - Tono lateral: (Definir, por defecto está en 32)
3.5 - Tono de llamada (IMY:0 al 10, MIDI:0 al 10, SOUND: 0 al 9)
3.6 - Mejora de voz
3.6.1 - Parámetros comunes
3.6.2 - Modo normal
3.6.3 - Modo auricular
3.6.4 - Modo altavoz
3.6.5 - Modo de auricular BT
3.6.6 - Modo inalámbrico BT
3.6.7 - Modo AUX 1
3.6.8 - Modo AUX 2
3.6.9 - Modo AUX 3
3.7 - Balanceo max.(Por defecto 12800) (Borrar o Aceptar). Si sales, sales totalmente del M.I.
3.8 - Debug Info.: (Del 0 al 15)
3.9 - Auto Record Setting
4.- GPRS Act
4.1 - Adjuntar
4.2 - 1st PDP
4.3 - 2nd PDP
5.- Misc.
5.1 - Respuesta automática
5.2 - RAM Test
5.3 - Memory Dump
5.4 - MMI Debug
5.5 - AMR
5.6 - Internet Application
5.7 - J2ME TCK
5.8 - Touch Screen
5.9 - Fixed Gain for Helios2
6.- Auto Test List
6.1 - Version (Add from list, Change priority, Remove)
6.2 - BackLight (Add from list, Change priority, Remove)
6.3 - LCD (Add from list, Change priority, Remove)
6.4 - KeyPad (Add from list, Change priority, Remove)
6.5 - Receiver (Add from list, Change priority, Remove)
6.6 - Mic (Add from list, Change priority, Remove)
6.7 - Speaker (Add from list, Change priority, Remove)
6.8 - Headset (Add from list, Change priority, Remove)
6.9 - Battery (Add from list, Change priority, Remove)
6.10 - Melody (Add from list, Change priority, Remove)
6.11 - Vibrator (Add from list, Change priority, Remove)
6.12 - Charger (Add from list, Change priority, Remove)
6.13 - Back Camera (Add from list, Change priority, Remove)
6.14 - Front Camera (Add from list, Change priority, Remove)
6.15 - Memory Card (Add from list, Change priority, Remove)
6.16 - Parallel Line (Add from list, Change priority, Remove)
7.- Debug Info
7.1 - Last Exception
8.- Bluetooth
8.1 - General Test:
8.1.1 Start Testing
8.1.2 Add Audio Conn
8.1.3 Remove Audio Conn
8.1.4 Far End Lookback
8.1.5 Exit Test Mode)
8.2 - Bluetooth RF Test
8.3 - Get Chip Version
8.4 - Bluetooth UPF Test
9.- Profiling
9.1 - Memory Monitor (Apagar o encender)
9.2 - Memory Statistic: (En mi caso pone lo siguiente, que no entiendo...)
*app-asm*: pool size:717376, max caller id:0, max alloc size:0
*scr-asm*: pool size:619460, max caller id:19681, max alloc size:6624
10.- RF Test Tool
10.1 - GSM
10.2 - Wifi
Última edición:
Foro Xiaomi
Foro Realme
Foro OnePlus
Foro Jiayu
Foro Lenovo
Foro Samsung
Foro Nubia
Foro Blackview
Foro impresoras 3D