- 5 inch IPS Screen, 960*540 pixel display
- MTK6582 1.3GHz Quad core
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 1 GB RAM + 4GB ROM
- 8MP back camera + 2MP front camera
- The latest Android 4.2 System
Some customers told us that they received the inew v3 can not make calling because the IMEI is invalid, i make a Operation Guide to teach you how to write the IMEI number to your phone.
iNew factory released a new ROM – V1.0.3. This iNew V3 Rom fix many errors including camera problems, NFC, OTG and many other bugs or problems.
Download a driver for device from here. After that you need to download Flash tool from here. And finally the ROM for iNew V3 you can downlod from here.
How to install the iNew V3 Rom
Prepare the Flash tool, then install the driver for the phone. You need to connect the phone to the computer via USB cable. Then your computer will recognize the phone as MT65XX preloader. If your computer does not recognize the new device then you need to go to device manager and find it. See photo below.
When you install the driver, then you need to run the program Flash Tool.exe. After entering go and check the USB Mode. Thereafter click Scatter-loading button and select the txt file from folder.
When you load the txt file, this should look like this.
In the last step you need to click Firmware-Upgrade. Right after that you need to plug in the phone to the PC(phone needs to be turned off). Firmware upgrade will start running until you see the green circle. Then upgrade of new ROM for the iNew V3 is finished. I am not responsible for the possible problems, you are doing this at your own risk.
Android smart phone with MTK CPU Flash ROM Operating Instructions by coolicool
1. This method is suitable for most MTK Android phones, there will be special circumstances.
2. Please confirm the ROM is suitble for your phone.
3. Flash ROM have risk of your phone.
4. Sometimes the computer is missing android usb drive or pop INF Install invalid information, such as encountered situation, install write-yard drive in the android cdc and usbser.sys, then install the USB VCOM
5. Because my computer can not using with English, so Screenshot are Chinese, i think you can understand it.
Preparation:
1. Flash Tool. This tool is commonly used in most MTK Android phones, of course, some phones need to use special tools optimized.
2. Install the driver.
I can supply a Driver for all MTK phones, please download it
Method of install driver(Only first time need install):
(1)The phone battery (enough power) to allocate again into the phone
(2)Phone connected to the computer via USB cable, your computer lower right corner will pop up Found New Hardware Tips: MT65XX Preloader, or go to the computer device manager to find driving tips like picture below
(3)As shown in the installation interface into the driver
Click Install the software automatically (if not installed automatically, manually select USB VCOM)
After installation is complete, the interface as shown in the following figure appears, click Cancel to skip, and then point to complete
(4)Part of the PC driver installation interface will continue to pop up, as shown below, click Finish to install the software automatically
Start reflash the ROM
1. Open the Flash Tool(Download it) as picture below:
2. Enter the following interface
After entering, click on the menu bar options option in the pull-down menu on the check the USB Mode
3.Click Scatter-loading, select the desired package, the package is txt file
4.Click Firmware→Upgrate,then connect your phone to the computer(Keep the phone off the power). Start running until the progress bar below appears OK interface, the upgrade is complete.
- 5 inch Screen, 854*480 pixel display
- MTK6582 1.3GHz Quad core
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 1 GB RAM + 8GB ROM
- 8MP back camera + 2MP front camera
- The latest Android 4.2 System
- 4.5 inch Screen, 854*480pixel display
- MTK6572 1.2GHz Dual core
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 512 MB RAM + 4GB ROM
- 2MP back camera + 0.3MP front camera
- The latest Android 4.2 System
- 5 inch IPS Screen, 960*540 pixel display
- MTK6582 1.3GHz Quad core
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 1 GB RAM + 4GB ROM
- 8MP back camera + 2MP front camera
- The latest Android 4.2 System
No ha sido buscando un ebook reader mejor que el Kindle que he dado con el protagonista de este análisis, si no investigando, por mera curiosidad sobre la existencia de lectores de libros electrónicos ...
Los móviles Android tienen desde hace tiempo una característica poco conocida pero extremadamente útil: un “botón” secreto en la parte trasera del dispositivo. Este botón no es físico, sino que se bas ...
¿Estás verdaderamente seguro de que tu red Wi-Fi es infranqueable? En un mundo cada vez más interconectado, la seguridad de nuestra señal Wi-Fi se torna indispensable. Si alguien intercepta tu red o u ...
Diversas operadoras de telefonía móvil ofrecen múltiples servicios que permiten a los usuarios compartir Internet desde un iPhone. Cada vez más, surgen alternativas para compartir datos desde los telé ...
La nueva serie POCO F6: potencia y elegancia en un solo dispositivo POCO ha lanzado al mercado su nueva serie de smartphones POCO F6, que prometen llevar la experiencia de juego y fotografía a un nuev ...