2) ROOT TUTORIAL ALCATEL OT-918D (Android 2.3.6)
Once the driver is installed for it to be detected as a COM port on the PC and FlashTool, do the following:
Commandments the Flashtool.exe (altalvoces connects your pc), thereupon conectais the phone off the USB cable to PC. When you get one or two beeps sound going to the Options menu and you look you have marked the COM port, as you can see in the picture:
Click image for larger version Name: 2012-08-05_1512.jpg Views: 160 Size: 20.9 KB ID: 3846
Once done, you load the file you scatter.txt for alcatel 918D android 2.3.6:
http://www.mediafire.com/download.php?rvilev32v35443n
Through the second scatter-loading tab, accept the two
windows you see some sort and search the list below Recovery, click two clicks and searches the file path you have donte Linerty Recovery
CWM Recovery:
http://www.mediafire.com/download.php?f7cug7yh7za7avb
Selects it (watch the path is correct) and immediately you give to DOWNLOAD. It will launch the program down a bar of yellow, let it reach the end (100%). Then beep you 2 or 3 times and you will see a square inside circle open a green or yellow and a beep sounds. Thus has finished, you hope you see the battery in the phone's display and you can remove the cable. Pulsais Enciendeis terminal and volume + key and power key at the same time. After 3 or 4 seconds soltais manteneis key pressed on and vol +. You will see then that you enter this menu:
Home Screen >> CWM Recovery install zip from sdcard toggle signature verification >> >> (and in the same window) choose zip from sdcard >> Superuser-3.0.7-EFGHI-signed.zip (main directory of your SD) (previously ought to copy it to the root directory of the sd without decompression). Begin to run and install.
Superuser-3.0.7-EFGHI-signed.zip:
http://www.mediafire.com/download.php?2f28dl1p5aoxlqa
At the end you will notice that over and then giving that menu saliis Go Back (2 times) until the initial window of recovery. Then you give it to Reboot system now and reboot the phone, but this time sereis ROOT.
Checking root is called Superuser apk see a menu in a program but also to pass as BASIC ROOTCHECK from official market.
This root is permanent like the programs conducted by the two previous methods, but it is only possible to apply the patch in our alcatel with a modified recovery like Linerty or CWM.
With this we are ROOT.
NOTE OF MODERATION:
THE RECOVERY OF LINERTY IF INSTALLED IN ANDROID 2.3.6 PRODUCES A BUG THAT MAKES WHEN TO DEFAULT resets the terminal, this does not and always enters recovery mode (you are warned).
Problems can be:
If seguiis my directions there should be none. You ought to leave scatter.txt file and the recovery of linerty unzipped (extracted the zip or rar) within the folder to load flashtool.Asi Satter. txt marcaros should automatically from the recovery and if not then you will find it by searching for it will be in the program folder.
Sometimes FlashTool despite having scored or set the com port (eg COM7), to give unbootable Download yellow bottom bar. If this occurs, only you ought to remove the battery and put it, or remove the USB cable from PC (which is easier to apply and remove) and immediately replacing.
Doing the Recovery process of Linerty as if doing a hard reset you come into a loop instead of resetting the phone, I always reload the recovery.
Greetings.
PS: When you have a moment, put this tutorial in the main post as special method to root 2.3.6
EDIT: CHANGED BY RECOVERI LINERTY CWM RECOVERY 5.0.2.8 FOR ANDROID VERSION 2.3.6