Re: [clockwork] Version 6.0.3.6 para haier w910
To boot in
recovery mode you should boot the phone pressing vol- and power button simultaneously. A green led turn on.
But this recovery should to be installed it using fastboot, isn't a recovery installable file.
To install, first you should enter into fastboot mode:
-Power off.
-Press vol- and connect to usb (maintaining vol - pressed) and a blue led turn on and phone boots into fastboot mode.
Then if you want to flash a recovery image like are in this post, extract zip and do "fastboot.exe devices" in
windows cmd
This shows a device connected. If no device detected, try to install windows drivers for haier w910 and exec same command.
Well, if you are here with fastboot mode enabled and recognized by windows, only exec .bat archive, this flashes stock recovery system by a
cwm.
Remember, this only works on haier w910.