Hola a todos,
Pude sentarme un ratito con el "tester" (AKA multímetro) y esto es lo que pude averiguar siempre basado en esta nomenclatura:
Midiendo resistencia:
Estoy casi seguro que esto indica el siguiente pinout:
Esto parece coincidir con lo que dice el artículo en inglés de la Wikipedia (cito):
"3.5 mm TRRS (stereo-plus-mic) sockets are particularly common on recent smartphones, and have been used e.g. by Nokia since 2006; this is often compatible with standard 3.5 mm stereo headphones. 2 different forms are frequently found, both of which place left audio on the tip and right audio on the first ring (mirroring the configuration found on stereo connectors). Where they differ is in the placement of the microphone and return contacts. The first, which places the return signal on the second ring and the microphone on the sleeve, is used by Apple's iPhone line, HTC devices, latest Samsung's, Nokia and Sony phones, among others. The second, which reverses these contacts, is used by older Samsung smartphones and some Sony Ericsson phones.[21] One such pin assignment, with ground on the sleeve, is standardized in OMTP[22] and has been accepted as a national Chinese standard YDT 1885-2009."
(TRRS significa Tip, Ring, Ring, Sleeve que son los cuatro contactos del conector)
El artículo también nos da una pista sobre lo que ya sospechaba (https://www.movilesdualsim.com/tema/W3-W3-Dual-Core-Review.14368?p=152886&viewfull=1#post152886) y explica porqué no podemos hacer funcionar otros headsets en nuestro móvil:
El conector del ThL W3 dual core es del segundo tipo descrito arriba, cumple con los estándares OMTP y el YDT chino, mientras que el pinout de los del 1er. tipo (usado por marcas famosas que evidentemente hacen la suya y no le dan bolilla a OMTP ) es:
Notar como están intercambiadas las posiciones de los contactos Tierra y Mic.
Pude sentarme un ratito con el "tester" (AKA multímetro) y esto es lo que pude averiguar siempre basado en esta nomenclatura:
Midiendo resistencia:
- Entre 1 y 4: 32 Ohm
- Entre 2 y 4: 32 Ohm
- Entre 3 y 4: Variable entre circuito abierto y 1 KOhm de acuerdo a la escala del multímetro usada, aparentemente depende de la corriente circulante lo que indicaría que existe un componente activo entre esos pines.
- Cuando se presiona el pulsador: La resistencia entre 3 y 4 disminuye a aprox. 350 Ohm.
Estoy casi seguro que esto indica el siguiente pinout:
- Audio izq.
- Audio der.
- Mic (corto-circuito con Tierra cuando se acciona pulsador)
- Tierra.
Esto parece coincidir con lo que dice el artículo en inglés de la Wikipedia (cito):
"3.5 mm TRRS (stereo-plus-mic) sockets are particularly common on recent smartphones, and have been used e.g. by Nokia since 2006; this is often compatible with standard 3.5 mm stereo headphones. 2 different forms are frequently found, both of which place left audio on the tip and right audio on the first ring (mirroring the configuration found on stereo connectors). Where they differ is in the placement of the microphone and return contacts. The first, which places the return signal on the second ring and the microphone on the sleeve, is used by Apple's iPhone line, HTC devices, latest Samsung's, Nokia and Sony phones, among others. The second, which reverses these contacts, is used by older Samsung smartphones and some Sony Ericsson phones.[21] One such pin assignment, with ground on the sleeve, is standardized in OMTP[22] and has been accepted as a national Chinese standard YDT 1885-2009."
(TRRS significa Tip, Ring, Ring, Sleeve que son los cuatro contactos del conector)
El artículo también nos da una pista sobre lo que ya sospechaba (https://www.movilesdualsim.com/tema/W3-W3-Dual-Core-Review.14368?p=152886&viewfull=1#post152886) y explica porqué no podemos hacer funcionar otros headsets en nuestro móvil:
El conector del ThL W3 dual core es del segundo tipo descrito arriba, cumple con los estándares OMTP y el YDT chino, mientras que el pinout de los del 1er. tipo (usado por marcas famosas que evidentemente hacen la suya y no le dan bolilla a OMTP ) es:
- Audio izq.
- Audio der.
- Tierra
- Mic
Notar como están intercambiadas las posiciones de los contactos Tierra y Mic.
Última edición por un moderador: