[FAQ] Preguntas, trucos y mejoras para ZP900 y clónicos

Ostras, gracias, hace unos días que no entraba al foro desde el PC y siempre uso el Tapatalk, pero no me había fijado en el color azul del nick. ¿Cuánto aumenta el sueldo con este ascenso? :biggrin:
en el sobre de cada mes va un poquito mas XD
 
yo lo habia comprado en alegrecompra por 170 euros funda, carcasa, dos baterias y cargador externo. Ya te digo que es una decisión muy personal el thl w8 esta sobre ese precio (189 dolares) en banggood, y es un quad de 5 pulgadas con funda de libro de regalo. El zp900 es ICS y no va a cambiar. El otro es jb ...

Hola compi,al final te e hecho caso y me he comprado el thl w8 ,en la tienda que me has dicho y al final con el cupon descuento me ha salido
muy bien de precio,la verdad esque dicen que el thl w8 ,es un pepino,gracias por recomendarmelo.

un saludo.-
 
Hola compi,al final te e hecho caso y me he comprado el thl w8 ,en la tienda que me has dicho y al final con el cupon descuento me ha salido
muy bien de precio,la verdad esque dicen que el thl w8 ,es un pepino,gracias por recomendarmelo.

un saludo.-

Ok pues ahí pasas a cargo de @Tirizia tiene muy buenos post leete todo bien antes de hacer nada

Enviado desde mi zp900 usando Tapatalk 2
 
Última edición por un moderador:
Ok pues ahí pasas a cargo de @Tirizia tiene muy buenos post leete todo bien antes de hacer nada

Enviado desde mi zp900 usando Tapatalk 2

Me has pillado ahora mismo en el post de la compi,ha hecho un grandioso trabajo,todo ordenadito y claro, repito @Tirizia ha hecho un gran trabajo.

un saludo.-
 
Última edición por un moderador:
ha mi me aumento la memoria interna y me bajo la ram a 500megas me podrias decir por que
 
Flufy, sé que tal vez no viene al caso. Pero quería preguntar si sabes cuando podriamos hacerle overclock al procesador, tengo entendido que es cosa del kernel. Buscando en Internet he leído que ya ha Sido liberado el código del mtk6577... sabes algo acerca de esto? :(
 
Sorry for writing this in English, but I'm not fluent in Spanish, only Portuguese or the first one. Today, when I wokeup, my ZP900 had the blue blinking LED on, I pressed the power button to see the notifications but the screen didn't come on. I realised it had crashed and took off the battery, but the phone doesn't turn on, and also won't charge anymore. Even connecting the cell to my computers through the USB cable without the baterry, the phone is not detected. It seems the phone died after discharging completely due to the familiar bug with "LEDS WAKELOCK", when the phone, after receiving some message, is put at 1GHz and don't go into deep sleep. I'm charging the battery externaly for some hours now, but I'm afraid my phone is nothing more than a brick now.
 
Flufy, sé que tal vez no viene al caso. Pero quería preguntar si sabes cuando podriamos hacerle overclock al procesador, tengo entendido que es cosa del kernel. Buscando en Internet he leído que ya ha Sido liberado el código del mtk6577... sabes algo acerca de esto? :(
pues me parece que nunca van a liberar el kernel y sin eso no hay nada que hacer

Sorry for writing this in English, but I'm not fluent in Spanish, only Portuguese or the first one. Today, when I wokeup, my ZP900 had the blue blinking LED on, I pressed the power button to see the notifications but the screen didn't come on. I realised it had crashed and took off the battery, but the phone doesn't turn on, and also won't charge anymore. Even connecting the cell to my computers through the USB cable without the baterry, the phone is not detected. It seems the phone died after discharging completely due to the familiar bug with "LEDS WAKELOCK", when the phone, after receiving some message, is put at 1GHz and don't go into deep sleep. I'm charging the battery externaly for some hours now, but I'm afraid my phone is nothing more than a brick now.

Boas, se preferes falamos entre galego/portugues ou en ingles. Se empregas a DRX, DST ou JellyTime non tes problemas co deepsleep. Parece que pode ser que esgotaras a batería, a todos nos pasa de vez en cando, empregas o cargador externo e listo. Se non é eso sería un problema de hardware case seguro, pero parece pouco probable. Un brick non soe aparecer nun telefono que estaba funcionando ben, mais ven despois de instalar mal unha rom (semibrick) ou empregar un flashtool mal (brick mais grave)
 
Thanks for replying. I was using DRX 1.8 and sometimes I had problems with leds wakelock. I also think it's hard to believe my phone just bricked during the night, but it seems it's falty. On the day before I noticed something strange, the phone was hot without load. I rebooted and thought the problem was solved, then went to bed. I've charged the battery with my wall charger time enough to make it work if it was discharged, so far the phone doesn't turn on. Even connecting with USB cable without the battery makes nothing, no device connected.

My problem is exactly like in this video:
Just to alert, I saw today that Zopo released JB 4.1 for ZP900 on the forum zopomobile.

pues me parece que nunca van a liberar el kernel y sin eso no hay nada que hacer



Boas, se preferes falamos entre galego/portugues ou en ingles. Se empregas a DRX, DST ou JellyTime non tes problemas co deepsleep. Parece que pode ser que esgotaras a batería, a todos nos pasa de vez en cando, empregas o cargador externo e listo. Se non é eso sería un problema de hardware case seguro, pero parece pouco probable. Un brick non soe aparecer nun telefono que estaba funcionando ben, mais ven despois de instalar mal unha rom (semibrick) ou empregar un flashtool mal (brick mais grave)
 
Última edición por un moderador:
Thanks for replying. I was using DRX 1.8 and sometimes I had problems with leds wakelock. I also think it's hard to believe my phone just bricked during the night, but it seems it's falty. On the day before I noticed something strange, the phone was hot without load. I rebooted and thought the problem was solved, then went to bed. I've charged the battery with my wall charger time enough to make it work if it was discharged, so far the phone doesn't turn on. Even connecting with USB cable without the battery makes nothing, no device connected.

My problem is exactly like in this video:
Just to alert, I saw today that Zopo released JB 4.1 for ZP900 on the forum zopomobile.
Maybe it's a hardware brick. Try this:
1.- Open flashtool
2.- Push at the same time for 15 seconds: power, home, volume + & -
3.- put in the usb
4.- flash a stock rom


Enviado desde mi ZP900 usando Tapatalk 2
 
Última edición por un moderador:

Del blog

¿Ha terminado la locura de añadir tantas cámaras a los móviles?

  • Si

  • No

  • No lo se

  • Ya me gustaría...

  • Ya te gustaría...


Los resultados solo son visibles tras votar.
Atrás
Arriba