TUTORIAL Método Unbrick Kit para recuperar UMI Emax Mini

Breakk

Diamante
Cocinero
Corazón DualSIM
Mensajes
11.946
Puntos
10.430
Móvil
UMI IRON
Este método está sacado del foro oficial UMI.

El texto completo es este:

Unbrick Kit

Using the following sources you can resurrect your bricked UMI eMAX mini.
This tool is safe to use.

  • Qualcomm drivers for both x86 and x64 Windows systems: New_Qualcomm_Driver_8936_20150414.rar (These are unsigned drivers and you don't really need them since proper and signed drivers can be installed with the Flashtool. You need them only for operating with QPST.)
  • eMAX mini Software Download Tool:

6FA6-ZP1-P5002-Flashtool.EXE

(This tool has its own guide in its Help section. There's a driver installer in the tool as well. The Flashtool will install the mini_001_10/19/2015 - Build number: LRX22G version ROM on your phone)


To put your phone into downloader mode for flashing:


  1. Power off your phone (if your phone is in boot loop, you can power it off by keeping pressed the power button for about 10 seconcs. If your phone can't power off but always restarts, jump immediately to step 2. when you perceive/hear the vibration.)
  2. Connect your phone to USB and immediately (after the vibration) press and keep pressed all the 3 side-buttons until you see the Warning screen (just wait for the next vibration if your screen doesn't work because incompatible ROM is installed).
  3. Long press the Vol-up button until the screen gets dark (If your screen doesn't work, watch the device manager and releaase the button when the HS-USB QDLoader 9008 appears among the COM ports).
Ahora paso a comentaros el proceso, en Español:

Siguiendo el siguiente procedimiento y usando las siguientes herramientas, se puede recuperar el UMI Emax Mini, de forma segura:

  • Drivers Qualcomm, tanto para x86 y sistemas x64 de Windows: New_Qualcomm_Driver_8936_20150414.rar (.. Estos son los controladores sin firma y usted realmente no los necesitan ya adecuada y controladores firmados se pueden instalar con el FlashTool Usted los necesita sólo para operar con QPST)
  • Emax Mini Software Descargar herramienta:
6FA4-ZP0-P5002-Flashtool.EXE

6FA6-ZP1-P5002-Flashtool.EXE

(Esta herramienta tiene su propio guía en su sección de Ayuda Hay un instalador del driver controlador en la herramienta, así El FlashTool instalará el mini_001_10 / 19/2015 - Número de compilación.. : LRX22G versión de la ROM en su teléfono)​

Para poner el teléfono en modo downloader para flashear:
  1. Apague su teléfono (si el teléfono está en bucle de arranque, puede apagarlo al mantener presionado el botón de encendido durante unos 10 seconcs. Si su teléfono no puede apagar pero siempre reinicia, saltar inmediatamente al paso 2. cuando percibes / escuchar la vibración.)
  2. Conecte el teléfono al USB e inmediatamente (después de la vibración) presione y mantenga presionados los botones laterales 3 hasta que aparezca la pantalla de advertencia (sólo tiene que esperar para la próxima vibración si la pantalla no funciona porque ROM incompatibles está instalado).
  3. Mantenga pulsado el botón de Vol-up hasta que la pantalla se oscurece (Si la pantalla no funciona, ver el administrador de dispositivos y releaase el botón cuando el QDLoader HS-USB 9008 aparece entre los puertos COM).
Con este proceso, se recupera el Emax Mini con una rom original. Es un proceso que tarda entre 30 minutos y 1 hora, dependiendo de la velocidad de descarga de la rom. Aconsejable tener la bateria cargada y ejecutar el programa en modo administrador.
 
Última edición:
Este también lo pondría con chincheta.

Enviado desde mi eMAX mini mediante Tapatalk
 
Hay nueva versión de rom con la herramienta de recuperación:

This is the FlashTool version of the 6FA6-ZP1-P5002 firmware for UMI eMAX Mini


Attention! This tool is safe and easy to use, but all user data will be lost!


Changelog:

  • A lot of new languages added
  • The unworking OTA update feature removed
  • Some unnecessary apps removed


Installation
Connect your phone to USB and put it into downloader mode, then run the tool
eMAX mini Software Download Tool: 6FA6-ZP1-P5002-Flashtool.EXE (This tool has its own guide in its Help section. There's a driver installer in the tool as well. The Flashtool will install the mini_001_11/17/2015 version ROM on your phone)

To put UMI eMAX Mini into downloader mode for flashing:

  • Power off your phone - if your phone is in boot loop, you can power it off by keeping pressed the power button for about 10 seconcs. If your phone can't power off but always restarts, jump immediately to step 2. when you perceive/hear the vibration.
  • Connect your phone to USB and immediately (after the vibration) press and keep pressed all the 3 side-buttons until you see the Warning screen - just wait for the next vibration if your screen doesn't work because incompatible ROM is installed.
  • Long press the Vol-up button until the screen gets dark - If your screen doesn't work, watch the device manager and release the button when the HS-USB QDLoader 9008 appears among the COM ports.



P.s.: This is still the only method to update your eMAX Mini. Rootjoy, recovery or OTA updates are not available yet.

FUENTE: Message - UMI COMMUNITY - Powered by Discuz!
 
Yo estoy bajando la nueva versión y se la instalaré a @rareipe. Suerte que no he enviado todavia el movil.
Sube alguna captura o algo y comenta como va y el led ni lo habrán mirado claro, yo mirare hoy un XML para ver si pone algo del led y si no viene nada no se por donde mas tirarle al led.

Enviado desde mi eMAX mini mediante Tapatalk
 
Sube alguna captura o algo y comenta como va y el led ni lo habrán mirado claro, yo mirare hoy un XML para ver si pone algo del led y si no viene nada no se por donde mas tirarle al led.

Enviado desde mi eMAX mini mediante Tapatalk

No te calientes mas la cabeza. Luego lo reporto yo lo del led y que lo arreglen.
 
No te calientes mas la cabeza. Luego lo reporto yo lo del led y que lo arreglen.
Ya tengo la rom deodexada hoy si puedo sacare el services.jar los descompilare y mirare uno de los XML a ver si hace alguna mención al led, que lo mismo es una tonteria , a lo mejor en ese XML pone que para las notificaciones se encienda verde y como solo tiene led blanco pues no se enciende.

Enviado desde mi eMAX mini mediante Tapatalk
 
Ya tengo la rom deodexada hoy si puedo sacare el services.jar los descompilare y mirare uno de los XML a ver si hace alguna mención al led, que lo mismo es una tonteria , a lo mejor en ese XML pone que para las notificaciones se encienda verde y como solo tiene led blanco pues no se enciende.

Enviado desde mi eMAX mini mediante Tapatalk

Podria ser.

Creo que hay una aplicacion en play store que puedes probar a mandar al led varios colores y asi lo sabrias. Ahora no recuerdo su nombre, pero si quieres lo puedo buscar .
 
La has probado ya?
Dicen que el WiFi no va muy bien.

Enviado desde mi eMAX mini mediante Tapatalk

Lo siento, pero no he tenido tiempo. TEngo descargado el programa en el pc, pero no he podido en todo el dia.

Si va mal el wifi, casi mejor no actualizar
 
He vuelto a poner la versión antigua del programa con la rom anterior. Cada uno que elija la que quiera.
 
Yo sigo con la última versión. No he notado lo del wifi y mira que tengo mala conexión.

Enviado desde mi eMAX mini mediante Tapatalk
 

Del blog

Es tendencia

¿Ha terminado la locura de añadir tantas cámaras a los móviles?

  • Si

  • No

  • No lo se

  • Ya me gustaría...

  • Ya te gustaría...


Los resultados solo son visibles tras votar.
Atrás
Arriba