Este método está sacado del foro oficial UMI.
El texto completo es este:
Unbrick Kit
Using the following sources you can resurrect your bricked UMI eMAX mini.
This tool is safe to use.
To put your phone into downloader mode for flashing:
Siguiendo el siguiente procedimiento y usando las siguientes herramientas, se puede recuperar el UMI Emax Mini, de forma segura:
Para poner el teléfono en modo downloader para flashear:
El texto completo es este:
Unbrick Kit
Using the following sources you can resurrect your bricked UMI eMAX mini.
This tool is safe to use.
- Qualcomm drivers for both x86 and x64 Windows systems: New_Qualcomm_Driver_8936_20150414.rar (These are unsigned drivers and you don't really need them since proper and signed drivers can be installed with the Flashtool. You need them only for operating with QPST.)
- eMAX mini Software Download Tool:
6FA6-ZP1-P5002-Flashtool.EXE
(This tool has its own guide in its Help section. There's a driver installer in the tool as well. The Flashtool will install the mini_001_10/19/2015 - Build number: LRX22G version ROM on your phone)
(This tool has its own guide in its Help section. There's a driver installer in the tool as well. The Flashtool will install the mini_001_10/19/2015 - Build number: LRX22G version ROM on your phone)
To put your phone into downloader mode for flashing:
- Power off your phone (if your phone is in boot loop, you can power it off by keeping pressed the power button for about 10 seconcs. If your phone can't power off but always restarts, jump immediately to step 2. when you perceive/hear the vibration.)
- Connect your phone to USB and immediately (after the vibration) press and keep pressed all the 3 side-buttons until you see the Warning screen (just wait for the next vibration if your screen doesn't work because incompatible ROM is installed).
- Long press the Vol-up button until the screen gets dark (If your screen doesn't work, watch the device manager and releaase the button when the HS-USB QDLoader 9008 appears among the COM ports).
Siguiendo el siguiente procedimiento y usando las siguientes herramientas, se puede recuperar el UMI Emax Mini, de forma segura:
- Drivers Qualcomm, tanto para x86 y sistemas x64 de Windows: New_Qualcomm_Driver_8936_20150414.rar (.. Estos son los controladores sin firma y usted realmente no los necesitan ya adecuada y controladores firmados se pueden instalar con el FlashTool Usted los necesita sólo para operar con QPST)
- Emax Mini Software Descargar herramienta:
6FA4-ZP0-P5002-Flashtool.EXE
6FA6-ZP1-P5002-Flashtool.EXE
(Esta herramienta tiene su propio guía en su sección de Ayuda Hay un instalador del driver controlador en la herramienta, así El FlashTool instalará el mini_001_10 / 19/2015 - Número de compilación.. : LRX22G versión de la ROM en su teléfono)
6FA6-ZP1-P5002-Flashtool.EXE
(Esta herramienta tiene su propio guía en su sección de Ayuda Hay un instalador del driver controlador en la herramienta, así El FlashTool instalará el mini_001_10 / 19/2015 - Número de compilación.. : LRX22G versión de la ROM en su teléfono)
Para poner el teléfono en modo downloader para flashear:
- Apague su teléfono (si el teléfono está en bucle de arranque, puede apagarlo al mantener presionado el botón de encendido durante unos 10 seconcs. Si su teléfono no puede apagar pero siempre reinicia, saltar inmediatamente al paso 2. cuando percibes / escuchar la vibración.)
- Conecte el teléfono al USB e inmediatamente (después de la vibración) presione y mantenga presionados los botones laterales 3 hasta que aparezca la pantalla de advertencia (sólo tiene que esperar para la próxima vibración si la pantalla no funciona porque ROM incompatibles está instalado).
- Mantenga pulsado el botón de Vol-up hasta que la pantalla se oscurece (Si la pantalla no funciona, ver el administrador de dispositivos y releaase el botón cuando el QDLoader HS-USB 9008 aparece entre los puertos COM).
Última edición: