PROBLEMA Tablet brickeada, necesito un voluntario

sATELITE dijo:

Instalada bien pero sale en blanco, no muestra particiones

Enviado desde mi ZTE A2016 mediante Tapatalk

Haz clic para expandir...

Vicent76 dijo:

@maple es la V3 o la V4?

Haz clic para expandir...

sATELITE dijo:

Lo que tengo instalado es root explorar en la tablet

Enviado desde mi ZTE A2016 mediante Tapatalk

Haz clic para expandir...

sATELITE dijo:

Pues si toca pc no puedo descargar nada, no tengo línea aún por la maldita portabilidad... Y llevó una semana así ..y lo que queda

Enviado desde mi ZTE A2016 mediante Tapatalk

Haz clic para expandir...

guille9191 dijo:

la v3 y la v4 son iguales creo, la unica diferencia respecto al hardware me suena que era la memoria pero software identico, algunas tenian 32 gb como (8+8+8+8) y otras como (16+16) o algo asi

Haz clic para expandir...

Vicent76 dijo:

quiza le valga esto:


DDR info: 2GB @ 696MHz(1T)
DDR channel: DDR 0 + DDR 1


clr h-ram
DRAM: 2 GiB
relocation Offset is: 6fec0000
show partition table:
part: 0, name : logo, size : 2000000
part: 1, name : recovery, size : 2000000
part: 2, name : misc, size : 2000000
part: 3, name : boot, size : 2000000
part: 4, name : system, size : 40000000
part: 5, name : cache, size : 10000000
part: 6, name : data, size : 80000000
part: 7, name : media, size : end
aml_card_type=0x0
MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
[mmc_register] add mmc dev_num=1, port=2, if_type=6


Ramdisk start addr = 0x125b8800, len = 0x1ef3c3
Flat device tree start addr = 0x127a8000, len = 0x7d4e magic=0xedfe0dd0

[ 0.000000@0]
[ 0.000000@0] Total memory is 2046 MiB
[ 0.000000@0] Reserved low memory from 0x06000000 to 0x1e7fffff, size: 392 MiB
[ 0.000000@0] mesonfb0(high) : 0x7dc00000 - 0x80000000 ( 36 MiB)
[ 0.000000@0] mesonfb1(high) : 0x7db00000 - 0x7dc00000 ( 1 MiB)
[ 0.000000@0] mesonstream0(low) : 0x06100000 - 0x08100000 ( 32 MiB)
[ 0.000000@0] vdec0(low) : 0x08100000 - 0x18100000 (256 MiB)
[ 0.000000@0] ppmgr0(high) : 0x79900000 - 0x7db00000 ( 66 MiB)
[ 0.000000@0] jpegenc0(low) : 0x18100000 - 0x19900000 ( 24 MiB)
[ 0.000000@0] vdin00(low) : 0x19900000 - 0x1c000000 ( 39 MiB)
[ 0.000000@0] vdin10(low) : 0x1c000000 - 0x1d000000 ( 16 MiB)
[ 0.000000@0] amlvideo20(low) : 0x1d000000 - 0x1e800000 ( 24 MiB)
[ 0.000000@0] get storage device: storage 1
[ 0.000000@0] value=1
[ 0.000000@0] get_storage_device : get storage device: storage 1
[ 0.000000@0] get_storage_device : value=1
[ 0.000000@0] [get_storage_device] storage_flag=1
[ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
[ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
[ 0.000000@0] cma: Found region@0, memory base 0, size 24 MiB
[ 0.000000@0] cma: CMA: reserved 24 MiB at 2d800000
[ 0.000000@0] cma: Found region@1, memory base 0, size 18 MiB
[ 0.000000@0] cma: CMA: reserved 20 MiB at 2c400000
[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000@0] Meson chip version = RevB (19:B - 0:27ED)
[ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c1d31000 s8832 r8192 d15744 u32768
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 391952
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend logo=osd1,loaded,panel,debug storage=1 a9_clk_max=800000000
[ 0.000000@0] osd1:1
[ 0.000000@0] loaded:268435459
[ 0.000000@0] logo has been loaded
[ 0.000000@0] panel:25
[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 64MB 16MB 1457MB = 1537MB total
[ 0.000000@0] Memory: 1488064k/1488064k available, 85824k reserved, 1211392K highmem
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000@0] .text : 0xc0008000 - 0xc09f8194 (10177 kB)
[ 0.000000@0] .init : 0xc09f9000 - 0xc0a31280 ( 225 kB)
[ 0.000000@0] .data : 0xc0a32000 - 0xc0acc1c0 ( 617 kB)
[ 0.000000@0] .bss : 0xc0acc1c0 - 0xc0de220c (3161 kB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] NR_IRQS:256

sacado de aqui

Onda V975m ROM by Stane1983

Haz clic para expandir...

guille9191 dijo:

ahi salen los tamaños pero no las direcciones, igual es suficiente?, sino seguimos para bingo

Haz clic para expandir...