Portar rom MIUI

<6>[ 0.000000] Booting Linux on physical CPU 0
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.8-FXP+ ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 15 00:58:00 MST 2012
<4>[ 0.000000] CPU: ARMv7 Processor [511f04d0] revision 0 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[ 0.000000] Machine: SEMC BLUE CDB
<4>[ 0.000000] Ignoring unrecognised tag 0x54420003
<6>[ 0.000000] m0 size 8c00000 m1 start 90000000
<6>[ 0.000000] memory pool 3 (start ab600000 size 4800000) initialized
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[ 0.000000] socinfo_init: v6, id=123, ver=3.1, raw_id=1940, raw_ver=4, hw_plat=1, hw_plat_ver=65536
<6>[ 0.000000] accessory_chip=0 hw_plat_subtype=0
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00080200 -> 0x000a8400
<4>[ 0.000000] HighMem 0x000a8400 -> 0x000bff00
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[3] active PFN ranges
<4>[ 0.000000] 0: 0x00080200 -> 0x00088d00
<4>[ 0.000000] 0: 0x00090000 -> 0x000ab600
<4>[ 0.000000] 0: 0x000b7a02 -> 0x000bff00
<7>[ 0.000000] On node 0 totalpages: 181758
<7>[ 0.000000] Normal zone: 1284 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 133628 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 758 pages used for memmap
<7>[ 0.000000] HighMem zone: 46088 pages, LIFO batch:15
<6>[ 0.000000] allocating 15482880 bytes at c18fa000 (81afa000 physical) for fb
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c27c1000 s9408 r8192 d15168 u32768
<7>[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 179716
<5>[ 0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 kgsl.mmutype=gpummu androidboot.emmc=true androidboot.serialno=BORRADO androidboot.baseband=msm project_id=0 androidboot.board_adc=2147483647 imei=BORRADO wlanmac=BORRADO btmac=BORRADO meid= androidboot.mode=FOATRecovery Qsuperuser=1 console=none do_fsck=1 bootup_reason=recovery wifibin=0 picasso=BORRADO emmc_wp_size=8388608 board_id=DVT1 mic_cal=0x0,0,0,0,0,0
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 139MB 438MB 132MB = 709MB total
<5>[ 0.000000] Memory: 686748k/888484k available, 40284k reserved, 187384K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
<5>[ 0.000000] .text : 0xc0100000 - 0xc0b33000 (10444 kB)
<5>[ 0.000000] .data : 0xc0c00000 - 0xc0cb1810 ( 711 kB)
<5>[ 0.000000] .bss : 0xc0cb1834 - 0xc0e9784c (1945 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:817
<6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
<6>[ 0.150221] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67672)
<6>[ 0.150251] pid_max: default: 32768 minimum: 301
<6>[ 0.150587] Mount-cache hash table entries: 512
<6>[ 0.151533] Initializing cgroup subsys debug
<6>[ 0.151564] Initializing cgroup subsys cpuacct
<6>[ 0.151625] Initializing cgroup subsys freezer
<6>[ 0.151686] CPU: Testing write buffer coherency: ok
<6>[ 0.151991] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[ 0.160354] Brought up 2 CPUs
<6>[ 0.160384] SMP: Total of 2 processors activated (27.06 BogoMIPS).
<6>[ 0.175186] print_constraints: dummy:
<3>[ 0.175278] rdev_init_debugfs: Error-Bad Function Input
<6>[ 0.175522] NET: Registered protocol family 16
<3>[ 0.175705] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[ 0.177994] meminfo_init: smem ram ptable found: ver: 0 len: 5
<6>[ 0.178025] Found 1 memory banks grouped into 8 memory regions
<6>[ 0.178055] msm_tsens_early_init: done
<6>[ 0.178086] msm_rpm_init: RPM firmware 3.0.16843280
<6>[ 0.200640] rcg_clk_handoff: sdc1_clk rate=48000000
<6>[ 0.200701] rcg_clk_handoff: mdp_clk rate=200000000
<6>[ 0.203021] saw_probe: id=0, name=8921_s5
<6>[ 0.203357] saw_probe: id=1, name=8921_s6
<6>[ 0.203601] pm8921_probe: PMIC revision 1: F4
<6>[ 0.203631] pm8921_probe: PMIC revision 2: 06
<6>[ 0.203631] pm8921_probe: PMIC version: PM8921 rev 3.0
<6>[ 0.203662] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
<6>[ 0.205524] pm_gpio_probe: OK: base=152, ngpio=44
<6>[ 0.205859] pm8xxx_mpp_probe: OK: base=196, ngpio=12
<6>[ 0.213154] ram_console: got buffer at 88de0000, size 20000
<6>[ 0.213306] ram_console: uncorrectable error in header
<6>[ 0.213306] ram_console: no valid data in buffer (sig = 0xc0c0c0c0)
<6>[ 0.222432] console [ram-1] enabled
<6>[ 0.233450] select_freq_plan: ACPU PVS: Fast
<6>[ 0.233572] select_freq_plan: Current max ACPU freq: 918000 KHz
<6>[ 0.236593] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
<6>[ 0.236685] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
<4>[ 0.250785] ------------[ cut here ]------------
<4>[ 0.250907] WARNING: at ../../../../../../kernel/sony/msm8x60/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x9c/0xb0()
<4>[ 0.251060] Attempting to enable gsbi3_qup_clk before setting its rate. Set the rate first!
<4>[ 0.251243] Modules linked in:
<4>[ 0.251396] Backtrace:
<4>[ 0.251640] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 0.251732] r6:0000014a r5:c014d2a8 r4:e083ddb0 r3:271aed14
<4>[ 0.252250] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 0.252403] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c01764a8>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 0.252495] r8:00000000 r7:a0000013 r6:a0000093 r5:fa012a0c r4:c0c408fc
<4>[ 0.252983] r3:00000009
<4>[ 0.253227] [<c0176470>] (warn_slowpath_fmt+0x0/0x40) from [<c014d2a8>] (__rcg_clk_enable_reg+0x9c/0xb0)
<4>[ 0.253380] r3:c098a070 r2:c0989304
<4>[ 0.253654] [<c014d20c>] (__rcg_clk_enable_reg+0x0/0xb0) from [<c014d494>] (rcg_clk_enable+0x2c/0x48)
<4>[ 0.253807] r5:c0d1bac8 r4:c0c4094c
<4>[ 0.254143] [<c014d468>] (rcg_clk_enable+0x0/0x48) from [<c011880c>] (clk_enable+0x9c/0x158)
<4>[ 0.254234] r6:c0c4098c r5:00000000 r4:c0c4094c r3:c014d468
<4>[ 0.254723] [<c0118770>] (clk_enable+0x0/0x158) from [<c07f8360>] (qup_i2c_probe+0x3d4/0x7cc)
<4>[ 0.254906] r8:00000000 r7:c0c5332c r6:c0c53348 r5:c0c4eb08 r4:e0805000
<4>[ 0.255302] r3:60000013
<4>[ 0.255577] [<c07f7f8c>] (qup_i2c_probe+0x0/0x7cc) from [<c0459dec>] (platform_drv_probe+0x20/0x24)
<4>[ 0.255730] [<c0459dcc>] (platform_drv_probe+0x0/0x24) from [<c0458a14>] (driver_probe_device+0x98/0x1b4)
<4>[ 0.255913] [<c045897c>] (driver_probe_device+0x0/0x1b4) from [<c0458bc4>] (__driver_attach+0x94/0x98)
<4>[ 0.256065] r8:00000000 r7:00000000 r6:c0c4eb44 r5:c0c88830 r4:c0c4eb10
<4>[ 0.256493] r3:00000000
<4>[ 0.256798] [<c0458b30>] (__driver_attach+0x0/0x98) from [<c0457b4c>] (bus_for_each_dev+0x64/0x90)
<4>[ 0.256889] r6:c0458b30 r5:00000000 r4:c0c88830 r3:c0458b30
<4>[ 0.257378] [<c0457ae8>] (bus_for_each_dev+0x0/0x90) from [<c04586c0>] (driver_attach+0x24/0x28)
<4>[ 0.257561] r6:e08e5880 r5:c0c784c8 r4:c0c88830
<4>[ 0.257897] [<c045869c>] (driver_attach+0x0/0x28) from [<c0458380>] (bus_add_driver+0x188/0x250)
<4>[ 0.258049] [<c04581f8>] (bus_add_driver+0x0/0x250) from [<c04590c8>] (driver_register+0x80/0x138)
<4>[ 0.258232] [<c0459048>] (driver_register+0x0/0x138) from [<c045a200>] (platform_driver_register+0x4c/0x60)
<4>[ 0.258385] r8:00000000 r7:00000013 r6:00000000 r5:c0cb1840 r4:e083c000
<4>[ 0.258812] r3:00000000
<4>[ 0.259056] [<c045a1b4>] (platform_driver_register+0x0/0x60) from [<c002c524>] (qup_i2c_init_driver+0x14/0x1c)
<4>[ 0.259240] [<c002c510>] (qup_i2c_init_driver+0x0/0x1c) from [<c01005e8>] (do_one_initcall+0x11c/0x184)
<4>[ 0.259392] [<c01004cc>] (do_one_initcall+0x0/0x184) from [<c0008b60>] (kernel_init+0x90/0x130)
<4>[ 0.259575] [<c0008ad0>] (kernel_init+0x0/0x130) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 0.259728] r5:c0008ad0 r4:00000000
<4>[ 0.260003] ---[ end trace da227214a82491b7 ]---
<4>[ 0.260430] ------------[ cut here ]------------
<4>[ 0.260613] WARNING: at ../../../../../../kernel/sony/msm8x60/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x9c/0xb0()
<4>[ 0.260766] Attempting to enable gsbi4_qup_clk before setting its rate. Set the rate first!
<4>[ 0.260857] Modules linked in:
<4>[ 0.261010] Backtrace:
<4>[ 0.261193] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 0.261376] r6:0000014a r5:c014d2a8 r4:e083ddb0 r3:271aed14
<4>[ 0.261773] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 0.261956] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c01764a8>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 0.262108] r8:00000000 r7:a0000013 r6:a0000093 r5:fa012a2c r4:c0c40990
<4>[ 0.262536] r3:00000009
<4>[ 0.262841] [<c0176470>] (warn_slowpath_fmt+0x0/0x40) from [<c014d2a8>] (__rcg_clk_enable_reg+0x9c/0xb0)
<4>[ 0.262994] r3:c098a080 r2:c0989304
<4>[ 0.263268] [<c014d20c>] (__rcg_clk_enable_reg+0x0/0xb0) from [<c014d494>] (rcg_clk_enable+0x2c/0x48)
<4>[ 0.263421] r5:c0d1bac8 r4:c0c409e0
<4>[ 0.263696] [<c014d468>] (rcg_clk_enable+0x0/0x48) from [<c011880c>] (clk_enable+0x9c/0x158)
<4>[ 0.263848] r6:c0c40a20 r5:00000000 r4:c0c409e0 r3:c014d468
<4>[ 0.264275] [<c0118770>] (clk_enable+0x0/0x158) from [<c07f8360>] (qup_i2c_probe+0x3d4/0x7cc)
<4>[ 0.264428] r8:00000000 r7:c0c53380 r6:c0c5339c r5:c0c4ec58 r4:e0805400
<4>[ 0.264916] r3:60000013
<4>[ 0.265160] [<c07f7f8c>] (qup_i2c_probe+0x0/0x7cc) from [<c0459dec>] (platform_drv_probe+0x20/0x24)
<4>[ 0.265344] [<c0459dcc>] (platform_drv_probe+0x0/0x24) from [<c0458a14>] (driver_probe_device+0x98/0x1b4)
<4>[ 0.265435] [<c045897c>] (driver_probe_device+0x0/0x1b4) from [<c0458bc4>] (__driver_attach+0x94/0x98)
<4>[ 0.265618] r8:00000000 r7:00000000 r6:c0c4ec94 r5:c0c88830 r4:c0c4ec60
<4>[ 0.266076] r3:00000000
<4>[ 0.266351] [<c0458b30>] (__driver_attach+0x0/0x98) from [<c0457b4c>] (bus_for_each_dev+0x64/0x90)
<4>[ 0.266503] r6:c0458b30 r5:00000000 r4:c0c88830 r3:c0458b30
<4>[ 0.266900] [<c0457ae8>] (bus_for_each_dev+0x0/0x90) from [<c04586c0>] (driver_attach+0x24/0x28)
<4>[ 0.267083] r6:e08e5880 r5:c0c784c8 r4:c0c88830
<4>[ 0.267480] [<c045869c>] (driver_attach+0x0/0x28) from [<c0458380>] (bus_add_driver+0x188/0x250)
<4>[ 0.267572] [<c04581f8>] (bus_add_driver+0x0/0x250) from [<c04590c8>] (driver_register+0x80/0x138)
<4>[ 0.267755] [<c0459048>] (driver_register+0x0/0x138) from [<c045a200>] (platform_driver_register+0x4c/0x60)
<4>[ 0.267907] r8:00000000 r7:00000013 r6:00000000 r5:c0cb1840 r4:e083c000
<4>[ 0.268396] r3:00000000
<4>[ 0.268640] [<c045a1b4>] (platform_driver_register+0x0/0x60) from [<c002c524>] (qup_i2c_init_driver+0x14/0x1c)
<4>[ 0.268823] [<c002c510>] (qup_i2c_init_driver+0x0/0x1c) from [<c01005e8>] (do_one_initcall+0x11c/0x184)
<4>[ 0.268976] [<c01004cc>] (do_one_initcall+0x0/0x184) from [<c0008b60>] (kernel_init+0x90/0x130)
<4>[ 0.269098] [<c0008ad0>] (kernel_init+0x0/0x130) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 0.269250] r5:c0008ad0 r4:00000000
<4>[ 0.269494] ---[ end trace da227214a82491b8 ]---
<4>[ 0.270013] ------------[ cut here ]------------
<4>[ 0.270105] WARNING: at ../../../../../../kernel/sony/msm8x60/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x9c/0xb0()
<4>[ 0.270257] Attempting to enable gsbi10_qup_clk before setting its rate. Set the rate first!
<4>[ 0.270441] Modules linked in:
<4>[ 0.270593] Backtrace:
<4>[ 0.270776] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 0.270929] r6:0000014a r5:c014d2a8 r4:e083ddb0 r3:271aed14
<4>[ 0.271417] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 0.271539] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c01764a8>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 0.271692] r8:00000000 r7:a0000013 r6:a0000093 r5:fa012aec r4:c0c40d08
<4>[ 0.272180] r3:00000009
<4>[ 0.272424] [<c0176470>] (warn_slowpath_fmt+0x0/0x40) from [<c014d2a8>] (__rcg_clk_enable_reg+0x9c/0xb0)
<4>[ 0.272577] r3:c098a0e0 r2:c0989304
<4>[ 0.272821] [<c014d20c>] (__rcg_clk_enable_reg+0x0/0xb0) from [<c014d494>] (rcg_clk_enable+0x2c/0x48)
<4>[ 0.273004] r5:c0d1bac8 r4:c0c40d58
<4>[ 0.273248] [<c014d468>] (rcg_clk_enable+0x0/0x48) from [<c011880c>] (clk_enable+0x9c/0x158)
<4>[ 0.273401] r6:c0c40d98 r5:00000000 r4:c0c40d58 r3:c014d468
<4>[ 0.273889] [<c0118770>] (clk_enable+0x0/0x158) from [<c07f8360>] (qup_i2c_probe+0x3d4/0x7cc)
<4>[ 0.273981] r8:00000000 r7:c0c532d8 r6:c0c532f4 r5:c0c4e9b8 r4:e0805800
<4>[ 0.274469] r3:60000013
<4>[ 0.274713] [<c07f7f8c>] (qup_i2c_probe+0x0/0x7cc) from [<c0459dec>] (platform_drv_probe+0x20/0x24)
<4>[ 0.274896] [<c0459dcc>] (platform_drv_probe+0x0/0x24) from [<c0458a14>] (driver_probe_device+0x98/0x1b4)
<4>[ 0.275080] [<c045897c>] (driver_probe_device+0x0/0x1b4) from [<c0458bc4>] (__driver_attach+0x94/0x98)
<4>[ 0.275232] r8:00000000 r7:00000000 r6:c0c4e9f4 r5:c0c88830 r4:c0c4e9c0
<4>[ 0.275629] r3:00000000
<4>[ 0.275904] [<c0458b30>] (__driver_attach+0x0/0x98) from [<c0457b4c>] (bus_for_each_dev+0x64/0x90)
<4>[ 0.276056] r6:c0458b30 r5:00000000 r4:c0c88830 r3:c0458b30
<4>[ 0.276545] [<c0457ae8>] (bus_for_each_dev+0x0/0x90) from [<c04586c0>] (driver_attach+0x24/0x28)
<4>[ 0.276697] r6:e08e5880 r5:c0c784c8 r4:c0c88830
<4>[ 0.277033] [<c045869c>] (driver_attach+0x0/0x28) from [<c0458380>] (bus_add_driver+0x188/0x250)
<4>[ 0.277216] [<c04581f8>] (bus_add_driver+0x0/0x250) from [<c04590c8>] (driver_register+0x80/0x138)
<4>[ 0.277369] [<c0459048>] (driver_register+0x0/0x138) from [<c045a200>] (platform_driver_register+0x4c/0x60)
<4>[ 0.277491] r8:00000000 r7:00000013 r6:00000000 r5:c0cb1840 r4:e083c000
<4>[ 0.277949] r3:00000000
<4>[ 0.278223] [<c045a1b4>] (platform_driver_register+0x0/0x60) from [<c002c524>] (qup_i2c_init_driver+0x14/0x1c)
<4>[ 0.278376] [<c002c510>] (qup_i2c_init_driver+0x0/0x1c) from [<c01005e8>] (do_one_initcall+0x11c/0x184)
<4>[ 0.278559] [<c01004cc>] (do_one_initcall+0x0/0x184) from [<c0008b60>] (kernel_init+0x90/0x130)
<4>[ 0.278712] [<c0008ad0>] (kernel_init+0x0/0x130) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 0.278803] r5:c0008ad0 r4:00000000
<4>[ 0.279139] ---[ end trace da227214a82491b9 ]---
<4>[ 0.279719] ------------[ cut here ]------------
<4>[ 0.279902] WARNING: at ../../../../../../kernel/sony/msm8x60/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x9c/0xb0()
<4>[ 0.280054] Attempting to enable gsbi12_qup_clk before setting its rate. Set the rate first!
<4>[ 0.280146] Modules linked in:
<4>[ 0.280390] Backtrace:
<4>[ 0.280543] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 0.280726] r6:0000014a r5:c014d2a8 r4:e083ddb0 r3:271aed14
<4>[ 0.281123] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 0.281306] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c01764a8>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 0.281458] r8:00000000 r7:a0000013 r6:a0000093 r5:fa012b2c r4:c0c40e30
<4>[ 0.281886] r3:00000009
<4>[ 0.282130] [<c0176470>] (warn_slowpath_fmt+0x0/0x40) from [<c014d2a8>] (__rcg_clk_enable_reg+0x9c/0xb0)
<4>[ 0.282313] r3:c098a100 r2:c0989304
<4>[ 0.282618] [<c014d20c>] (__rcg_clk_enable_reg+0x0/0xb0) from [<c014d494>] (rcg_clk_enable+0x2c/0x48)
<4>[ 0.282710] r5:c0d1bac8 r4:c0c40e80
<4>[ 0.283045] [<c014d468>] (rcg_clk_enable+0x0/0x48) from [<c011880c>] (clk_enable+0x9c/0x158)
<4>[ 0.283198] r6:c0c40ec0 r5:00000000 r4:c0c40e80 r3:c014d468
<4>[ 0.283625] [<c0118770>] (clk_enable+0x0/0x158) from [<c07f8360>] (qup_i2c_probe+0x3d4/0x7cc)
<4>[ 0.283778] r8:00000000 r7:c0c53284 r6:c0c532a0 r5:c0c4e868 r4:e0805c00
<4>[ 0.284205] r3:60000013
<4>[ 0.284541] [<c07f7f8c>] (qup_i2c_probe+0x0/0x7cc) from [<c0459dec>] (platform_drv_probe+0x20/0x24)
<4>[ 0.284632] [<c0459dcc>] (platform_drv_probe+0x0/0x24) from [<c0458a14>] (driver_probe_device+0x98/0x1b4)
<4>[ 0.284785] [<c045897c>] (driver_probe_device+0x0/0x1b4) from [<c0458bc4>] (__driver_attach+0x94/0x98)
<4>[ 0.284968] r8:00000000 r7:00000000 r6:c0c4e8a4 r5:c0c88830 r4:c0c4e870
<4>[ 0.285457] r3:00000000
<4>[ 0.285701] [<c0458b30>] (__driver_attach+0x0/0x98) from [<c0457b4c>] (bus_for_each_dev+0x64/0x90)
<4>[ 0.285853] r6:c0458b30 r5:00000000 r4:c0c88830 r3:c0458b30
<4>[ 0.286281] [<c0457ae8>] (bus_for_each_dev+0x0/0x90) from [<c04586c0>] (driver_attach+0x24/0x28)
<4>[ 0.286433] r6:e08e5880 r5:c0c784c8 r4:c0c88830
<4>[ 0.286769] [<c045869c>] (driver_attach+0x0/0x28) from [<c0458380>] (bus_add_driver+0x188/0x250)
<4>[ 0.286952] [<c04581f8>] (bus_add_driver+0x0/0x250) from [<c04590c8>] (driver_register+0x80/0x138)
<4>[ 0.287105] [<c0459048>] (driver_register+0x0/0x138) from [<c045a200>] (platform_driver_register+0x4c/0x60)
<4>[ 0.287288] r8:00000000 r7:00000013 r6:00000000 r5:c0cb1840 r4:e083c000
<4>[ 0.287685] r3:00000000
<4>[ 0.288020] [<c045a1b4>] (platform_driver_register+0x0/0x60) from [<c002c524>] (qup_i2c_init_driver+0x14/0x1c)
<4>[ 0.288173] [<c002c510>] (qup_i2c_init_driver+0x0/0x1c) from [<c01005e8>] (do_one_initcall+0x11c/0x184)
<4>[ 0.288295] [<c01004cc>] (do_one_initcall+0x0/0x184) from [<c0008b60>] (kernel_init+0x90/0x130)
<4>[ 0.288448] [<c0008ad0>] (kernel_init+0x0/0x130) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 0.288600] r5:c0008ad0 r4:00000000
<4>[ 0.288844] ---[ end trace da227214a82491ba ]---
<6>[ 0.290492] sps:REVISION of BAM 0xe1828000 is 0x5.
<6>[ 0.291133] sps is ready.
<6>[ 0.313047] bio: create slab <bio-0> at 0
<6>[ 0.314115] ION heap vmalloc created
<6>[ 0.314207] ION heap mm created at b0200000 with size 7800000
<6>[ 0.314329] ION heap mm_fw created at b0000000 with size 200000
<6>[ 0.314512] ION heap mfc created at b7a00000 with size 2000
<6>[ 0.314634] ION heap sf created at ab603000 with size 3c00000
<6>[ 0.314817] ION heap iommu created
<6>[ 0.314939] ION heap qsecom created at af203000 with size 600000
<6>[ 0.315122] ION heap audio created at af803000 with size 2b4000
<5>[ 0.315885] pm8xxx_pwm_probe: OK
<5>[ 0.316526] SCSI subsystem initialized
<6>[ 0.316740] sps:REVISION of BAM 0xe1830000 is 0x12.
<6>[ 0.317778] usbcore: registered new interface driver usbfs
<6>[ 0.318052] usbcore: registered new interface driver hub
<6>[ 0.318235] usbcore: registered new device driver usb
<6>[ 0.318815] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.319517] Bluetooth: Core ver 2.16
<6>[ 0.319731] NET: Registered protocol family 31
<6>[ 0.319822] Bluetooth: HCI device and connection manager initialized
<6>[ 0.319914] Bluetooth: HCI socket layer initialized
<6>[ 0.320006] Bluetooth: L2CAP socket layer initialized
<6>[ 0.320280] Bluetooth: SCO socket layer initialized
<6>[ 0.320891] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.321226] Switching to clocksource gp_timer
<6>[ 0.337280] NET: Registered protocol family 2
<6>[ 0.337677] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.338928] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.341980] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.343628] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.343811] TCP reno registered
<6>[ 0.343903] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.344025] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.344758] NET: Registered protocol family 1
<6>[ 0.345338] RPC: Registered named UNIX socket transport module.
<6>[ 0.345490] RPC: Registered udp transport module.
<6>[ 0.345582] RPC: Registered tcp transport module.
<6>[ 0.345734] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.346039] Trying to unpack rootfs image as initramfs...
<6>[ 0.467083] Freeing initrd memory: 1988K
<6>[ 0.468426] PMU: registered new PMU device of type 0
<6>[ 0.468823] PMU: registered new PMU device of type 1
<6>[ 0.469311] pmic8921-mic_bias pmic8921-mic_bias: Successfully registered
<6>[ 0.469891] msm_etb msm_etb: ETB initialized
<6>[ 0.470166] msm_tpiu msm_tpiu: TPIU initialized
<6>[ 0.470471] msm_funnel msm_funnel: FUNNEL initialized
<6>[ 0.472058] msm_etm msm_etm: ETM initialized
<6>[ 0.472241] QDSS initialized
<6>[ 0.473004] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
<6>[ 0.474195] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
<6>[ 0.475354] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
<6>[ 0.476819] pil_riva pil_riva: using secure boot
<3>[ 0.479536] smd_channel_probe_worker: allocation table not initialized
<6>[ 0.486677] NET: Registered protocol family 27
<6>[ 0.487471] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
<6>[ 0.489455] modem_8960_init: modem fatal driver init'ed.
<6>[ 0.489790] lpass_fatal_init: lpass SSR driver init'ed.
<6>[ 0.490004] wcnss_8960: module initialized
<5>[ 0.490859] msm_rpm_log_probe: OK
<4>[ 0.493575] highmem bounce pool size: 64 pages
<6>[ 0.493819] ashmem: initialized
<6>[ 0.504349] NTFS driver 2.1.30 [Flags: R/W DEBUG].
<6>[ 0.504990] fuse init (API version 7.16)
<6>[ 0.505417] msgmni has been set to 979
<6>[ 0.507950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
<6>[ 0.508103] io scheduler noop registered
<6>[ 0.508194] io scheduler deadline registered (default)
<6>[ 0.508438] io scheduler cfq registered
<6>[ 0.508530] io scheduler sio registered
<3>[ 0.508805] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 0.508927] qup_i2c qup_i2c.10: I2C slave addr:0x40 not connected
<3>[ 0.509140] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 0.509262] qup_i2c qup_i2c.10: I2C slave addr:0x40 not connected
<3>[ 0.509415] as3676 10-0040: could not configure ffffff95
<4>[ 0.509537] as3676: probe of 10-0040 failed with error -107
<3>[ 0.510788] mdp_bus_scale_update_request invalid bus handle
<6>[ 0.513596] mipi_dsi base phy_addr = 0x4700000 virt = 0xe1c00000
<6>[ 0.513779] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1876000
<6>[ 0.514115] default panel: mipi_tmd_panel
<6>[ 0.514298] setting pdata->panel_info.fb_num to 3. type: 8
<6>[ 0.515000] mdp4_dsi_vsync_init: ndx=0
<6>[ 0.515122] mdp_probe: panel_detect function
<4>[ 0.570883] mipi_renesas_r63306 mipi_renesas_r63306.0: cannot detect panel vendor!
<6>[ 0.571036] mipi_dsi_ahb_ctrl: ahb clks already ON
<6>[ 0.571127] mipi_dsi_clk_enable: mipi_dsi_clks already ON
<6>[ 0.617121] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
<4>[ 0.617335] load_565rle_image: Can not open /initlogo.rle
<6>[ 0.625270] Drawing logo.
<6>[ 0.892141] mipi_renesas_r63306 mipi_renesas_r63306.0: ECO MODE OFF
<4>[ 0.913688] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled
<6>[ 0.913963] setting pdata->panel_info.fb_num to 1. type: 7
<6>[ 0.914451] mdp4_dtv_vsync_init: ndx=0
<6>[ 0.914603] mdp_probe: panel_detect function
<6>[ 0.914695] mdp_probe: no panel_detect function
<6>[ 0.915153] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
<4>[ 0.915367] load_565rle_image: Can not open /initlogo.rle
<3>[ 0.915794] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e0050e08
<6>[ 0.915885] hdmi_msm hdmi_msm.1: HDMI HPD: ON
<3>[ 1.022218] Video format is : 33
<6>[ 1.022829] setting pdata->panel_info.fb_num to 1. type: 10
<3>[ 1.023103] Inside writeback_driver_init
<3>[ 1.023439] Inside writeback_probe
<6>[ 1.023714] mdp_probe: panel_detect function
<6>[ 1.023805] mdp_probe: no panel_detect function
<6>[ 1.024294] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
<4>[ 1.024416] load_565rle_image: Can not open /initlogo.rle
<6>[ 1.025728]
<6>[ 1.025728] msm_vidc_enc: Inside vid_enc_init()
<6>[ 1.026064]
<6>[ 1.026064] msm_vidc_enc: Inside vid_enc_vcd_init()
<6>[ 1.026827] msm_serial: driver initialized
<6>[ 1.027193] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
<6>[ 1.172409] msm_serial_hs module loaded
<6>[ 1.172592] msm_serial_hsl: detected port #0
<6>[ 1.172836] msm_serial_hsl.0: ttyHSL0 at MMIO 0x1a040000 (irq = 192) is a MSM
<6>[ 1.332275] msm_serial_hsl: driver initialized
<6>[ 1.333618] msm_rotator_probe: rotator_hw_revision=2
<6>[ 1.338837] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 1.340057] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 1.340973] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 1.347993] brd: module loaded
<6>[ 1.351258] loop: module loaded
<6>[ 1.351625] pmem: Initializing pmem_audio (user-space) as non-cached
<6>[ 1.351869] allocating 4096 bytes at (null) (afab7000 physical) for pmem_audio
<3>[ 1.353456] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 1.353578] qup_i2c qup_i2c.12: I2C slave addr:0x49 not connected
<3>[ 1.353761] lc898300-vib-i2c 12-0049: Configure failed rc = -107
<4>[ 1.353944] lc898300-vib-i2c: probe of 12-0049 failed with error -107
<6>[ 1.354951] lm3560 10-0053: lm3560_resume: Reinit lm3560 chip.
<3>[ 1.355196] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 1.355318] qup_i2c qup_i2c.10: I2C slave addr:0x53 not connected
<3>[ 1.355501] lm3560 10-0053: lm3560_set_reg_data(): Failed to read register(0x10). errno=-107
<3>[ 1.355592] lm3560 10-0053: lm3560_resume:chip init error
<3>[ 1.355745] lm3560 10-0053: lm3560_probe: failed with code -16.
<4>[ 1.355867] lm3560: probe of 10-0053 failed with error -16
<6>[ 1.371982] i2c i2c-12: mpu3050: +bma250
<6>[ 1.372073] i2c i2c-12: mpu3050: +ak8972
<4>[ 1.372226] i2c i2c-12: WARNING: Compass irq not assigned
<4>[ 1.372318] i2c i2c-12: mpu3050: No Pressure Present
<3>[ 1.372684] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 1.372806] qup_i2c qup_i2c.12: I2C slave addr:0x68 not connected
<3>[ 1.372989] mldl_cfg:../../../../../../kernel/sony/msm8x60/drivers/misc/mpu3050/mldl_cfg.c|MLDLPowerMgmtMPU|431 returning 149
<3>[ 1.373142] mldl_cfg:../../../../../../kernel/sony/msm8x60/drivers/misc/mpu3050/mldl_cfg.c|mpu3050_open|979 returning 149
<3>[ 1.373325] i2c i2c-12: Unable to open mpu3050 149
<3>[ 1.373416] i2c i2c-12: mpu3050_probe failed -19
<4>[ 1.373599] i2c-core: driver [mpu3050] using legacy suspend method
<4>[ 1.373691] i2c-core: driver [mpu3050] using legacy resume method
<6>[ 1.374790] tabla-slim tabla-slim: Initialized slim device tabla-slim
<3>[ 1.461956] fail to get slimbus logical address -6
<6>[ 1.464703] tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
<6>[ 1.558065] tabla_device_init : Tabla version 2 initialized
<6>[ 1.558553] tabla_device_init : Tabla version 2 initialized
<4>[ 1.558797] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[ 1.558950] i2c-core: driver [tabla-i2c-core] using legacy resume method
<6>[ 1.560018] SCSI Media Changer driver v0.25
<6>[ 1.560262] PPP generic driver version 2.4.2
<6>[ 1.560506] PPP Deflate Compression module registered
<6>[ 1.560659] PPP BSD Compression module registered
<6>[ 1.561727] modprobe (70): undefined instruction: pc=0008913c
<6>[ 1.561910] Code: 4669 f7fd ebf0 ed9d (0a01) 490c
<6>[ 1.562917] modprobe (72): undefined instruction: pc=0008913c
<6>[ 1.563009] Code: 4669 f7fd ebf0 ed9d (0a01) 490c
<6>[ 1.563558] PPP MPPE Compression module registered
<6>[ 1.563650] NET: Registered protocol family 24
<6>[ 1.563833] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 1.563985] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.566274] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.566427] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 1.566763] usbcore: registered new interface driver asix
<6>[ 1.566976] usbcore: registered new interface driver cdc_ether
<6>[ 1.567129] usbcore: registered new interface driver net1080
<6>[ 1.567373] usbcore: registered new interface driver cdc_subset
<6>[ 1.567526] usbcore: registered new interface driver zaurus
<6>[ 1.567678] cdc_ncm: 04-Aug-2011
<6>[ 1.567831] usbcore: registered new interface driver cdc_ncm
<6>[ 1.568045] wcnss_wlan probed in built-in mode
<6>[ 1.568716] rmnet_init: BAM devices[8]
<6>[ 1.581718] msm_otg msm_otg: msm_otg probe
<6>[ 1.581992] msm_otg msm_otg: OTG regs = e1894000
<6>[ 1.584861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<3>[ 1.585563] msm_hsic_host msm_hsic_host: unable to get hsic vddcx
<3>[ 1.585655] msm_hsic_host msm_hsic_host: unable to initialize VDDCX
<6>[ 1.586052] usb_host_ext_event has been registered!
<6>[ 1.586143] Initializing USB Mass Storage driver...
<6>[ 1.586387] usbcore: registered new interface driver usb-storage
<6>[ 1.586540] USB Mass Storage support registered.
<6>[ 1.586693] usbcore: registered new interface driver ums-alauda
<6>[ 1.586906] usbcore: registered new interface driver ums-cypress
<6>[ 1.587059] usbcore: registered new interface driver ums-datafab
<6>[ 1.587273] usbcore: registered new interface driver ums-freecom
<6>[ 1.587517] usbcore: registered new interface driver ums-isd200
<6>[ 1.587669] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.587883] usbcore: registered new interface driver ums-karma
<6>[ 1.588036] usbcore: registered new interface driver ums-onetouch
<6>[ 1.588249] usbcore: registered new interface driver ums-sddr09
<6>[ 1.588402] usbcore: registered new interface driver ums-sddr55
<6>[ 1.588646] usbcore: registered new interface driver ums-usbat
<6>[ 1.588890] usbcore: registered new interface driver usbserial
<6>[ 1.589043] usbserial: USB Serial Driver core
<6>[ 1.589165] USB Serial support registered for Qualcomm USB modem
<6>[ 1.589409] usbcore: registered new interface driver qcserial
<6>[ 1.589562] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.589775] usbcore: registered new interface driver diag_bridge
<6>[ 1.589958] usbcore: registered new interface driver mdm_bridge
<6>[ 1.590447] ncp373_probe: registered ncp373 vbus load switch
<6>[ 1.590874] msm_otg msm_otg: OTG_STATE_UNDEFINED state
<6>[ 1.591576] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
<6>[ 1.593743] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.593895] android_usb gadget: Number of LUNs=2
<6>[ 1.593987] lun0: LUN: removable file: (no medium)
<6>[ 1.594140] lun1: LUN: removable read only CD-ROM file: (no medium)
<6>[ 1.594597] android_usb gadget: android_usb ready
<6>[ 1.596337] diagchar initialized now
<7>[ 1.596764] gpio_set_debounce: gpio-171 status -22
<7>[ 1.596978] gpio_set_debounce: gpio-172 status -22
<6>[ 1.597283] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
<6>[ 1.598412] input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
<6>[ 1.599084] usbcore: registered new interface driver xpad
<6>[ 1.599328] usbcore: registered new interface driver usb_acecad
<6>[ 1.599420] acecad: v3.2:USB Acecad Flair tablet driver
<6>[ 1.599633] usbcore: registered new interface driver aiptek
<6>[ 1.599725] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[ 1.599877] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[ 1.600122] usbcore: registered new interface driver gtco
<4>[ 1.600213] GTCO usb driver version: 2.00.0006
<6>[ 1.600427] usbcore: registered new interface driver hanwang
<6>[ 1.600671] usbcore: registered new interface driver kbtab
<6>[ 1.600824] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[ 1.600976] usbcore: registered new interface driver wacom
<6>[ 1.601129] wacom: v1.52:USB Wacom tablet driver
<6>[ 1.602289] clearpad-rmi-dev clearpad-rmi-dev: Major number of rmidev: 239
<6>[ 1.602441] clearpad-rmi-dev clearpad-rmi-dev: Allocated rmidev 239 0.
<6>[ 1.614100] msm_otg msm_otg: phy_reset: success
<3>[ 2.012513] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1300c8, irq:183
<3>[ 2.012635] qup_i2c qup_i2c.3: I2C slave addr:0x2c not connected
<3>[ 2.012818] clearpad-i2c 3-002c: clearpad_i2c_read: rc = -107
<4>[ 2.013367] clearpad: probe of clearpad failed with error -107
<6>[ 2.014039] GPIO Input Driver: Start gpio inputs for sim-detection in interrupt mode
<4>[ 2.014161] ------------[ cut here ]------------
<4>[ 2.014344] WARNING: at ../../../../../../kernel/sony/msm8x60/drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x6c/0xf8()
<4>[ 2.014497] Modules linked in:
<4>[ 2.014680] Backtrace:
<4>[ 2.014863] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 2.015016] r6:00000617 r5:c03b1638 r4:00000000 r3:271aed14
<4>[ 2.015504] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.015595] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c0176428>] (warn_slowpath_null+0x24/0x2c)
<4>[ 2.015748] r8:00000001 r7:e09bab48 r6:c0c58da8 r5:000000bb r4:e08b3c88
<4>[ 2.016236] r3:00000009
<4>[ 2.016481] [<c0176404>] (warn_slowpath_null+0x0/0x2c) from [<c03b1638>] (__gpio_get_value+0x6c/0xf8)
<4>[ 2.016664] [<c03b15cc>] (__gpio_get_value+0x0/0xf8) from [<c053a7c4>] (gpio_event_input_timer_func+0x70/0x360)
<4>[ 2.016847] [<c053a754>] (gpio_event_input_timer_func+0x0/0x360) from [<c019a9b4>] (__run_hrtimer+0x7c/0x288)
<4>[ 2.016999] [<c019a938>] (__run_hrtimer+0x0/0x288) from [<c019b8f4>] (hrtimer_interrupt+0x120/0x294)
<4>[ 2.017091] [<c019b7d4>] (hrtimer_interrupt+0x0/0x294) from [<c019baac>] (__hrtimer_peek_ahead_timers.part.9+0x44/0x50)
<4>[ 2.017274] [<c019ba68>] (__hrtimer_peek_ahead_timers.part.9+0x0/0x50) from [<c019bb00>] (hrtimer_peek_ahead_timers+0x48/0x58)
<4>[ 2.017457] [<c019bab8>] (hrtimer_peek_ahead_timers+0x0/0x58) from [<c019bb20>] (run_hrtimer_softirq+0x10/0x14)
<4>[ 2.017610] r4:00000001 r3:c019bb10
<4>[ 2.017945] [<c019bb10>] (run_hrtimer_softirq+0x0/0x14) from [<c017d244>] (__do_softirq+0xd4/0x270)
<4>[ 2.018037] [<c017d170>] (__do_softirq+0x0/0x270) from [<c017d4e0>] (run_ksoftirqd+0x100/0x1e4)
<4>[ 2.018220] [<c017d3e0>] (run_ksoftirqd+0x0/0x1e4) from [<c01968d0>] (kthread+0x8c/0x94)
<4>[ 2.018403] [<c0196844>] (kthread+0x0/0x94) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 2.018556] r6:c0179d0c r5:c0196844 r4:e083df00
<4>[ 2.018892] ---[ end trace da227214a82491bb ]---
<4>[ 2.018983] ------------[ cut here ]------------
<4>[ 2.019166] WARNING: at ../../../../../../kernel/sony/msm8x60/drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x6c/0xf8()
<4>[ 2.019319] Modules linked in:
<4>[ 2.019471] Backtrace:
<4>[ 2.019655] [<c0109fbc>] (dump_backtrace+0x0/0x10c) from [<c0803bfc>] (dump_stack+0x18/0x1c)
<4>[ 2.019807] r6:00000617 r5:c03b1638 r4:00000000 r3:271aed14
<4>[ 2.020235] [<c0803be4>] (dump_stack+0x0/0x1c) from [<c01763ec>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.020418] [<c0176398>] (warn_slowpath_common+0x0/0x6c) from [<c0176428>] (warn_slowpath_null+0x24/0x2c)
<4>[ 2.020570] r8:00000001 r7:e09bab48 r6:c0c58da8 r5:000000bb r4:e08b3c88
<4>[ 2.021059] r3:00000009
<4>[ 2.021303] [<c0176404>] (warn_slowpath_null+0x0/0x2c) from [<c03b1638>] (__gpio_get_value+0x6c/0xf8)
<4>[ 2.021455] [<c03b15cc>] (__gpio_get_value+0x0/0xf8) from [<c053a7c4>] (gpio_event_input_timer_func+0x70/0x360)
<4>[ 2.021638] [<c053a754>] (gpio_event_input_timer_func+0x0/0x360) from [<c019a9b4>] (__run_hrtimer+0x7c/0x288)
<4>[ 2.021730] [<c019a938>] (__run_hrtimer+0x0/0x288) from [<c019b8f4>] (hrtimer_interrupt+0x120/0x294)
<4>[ 2.021852] [<c019b7d4>] (hrtimer_interrupt+0x0/0x294) from [<c019baac>] (__hrtimer_peek_ahead_timers.part.9+0x44/0x50)
<4>[ 2.022005] [<c019ba68>] (__hrtimer_peek_ahead_timers.part.9+0x0/0x50) from [<c019bb00>] (hrtimer_peek_ahead_timers+0x48/0x58)
<4>[ 2.022188] [<c019bab8>] (hrtimer_peek_ahead_timers+0x0/0x58) from [<c019bb20>] (run_hrtimer_softirq+0x10/0x14)
<4>[ 2.022340] r4:00000001 r3:c019bb10
<4>[ 2.022615] [<c019bb10>] (run_hrtimer_softirq+0x0/0x14) from [<c017d244>] (__do_softirq+0xd4/0x270)
<4>[ 2.022707] [<c017d170>] (__do_softirq+0x0/0x270) from [<c017d4e0>] (run_ksoftirqd+0x100/0x1e4)
<4>[ 2.022890] [<c017d3e0>] (run_ksoftirqd+0x0/0x1e4) from [<c01968d0>] (kthread+0x8c/0x94)
<4>[ 2.023042] [<c0196844>] (kthread+0x0/0x94) from [<c0179d0c>] (do_exit+0x0/0x754)
<4>[ 2.023134] r6:c0179d0c r5:c0196844 r4:e083df00
<4>[ 2.023531] ---[ end trace da227214a82491bc ]---
<6>[ 2.023866] input: sim-detection as /devices/virtual/input/input2
<6>[ 2.024477] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input3
<3>[ 2.025850] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.025972] qup_i2c qup_i2c.12: I2C slave addr:0x18 not connected
<3>[ 2.026186] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.026278] qup_i2c qup_i2c.12: I2C slave addr:0x18 not connected
<3>[ 2.026491] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.026674] qup_i2c qup_i2c.12: I2C slave addr:0x18 not connected
<3>[ 2.026827] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.026980] qup_i2c qup_i2c.12: I2C slave addr:0x18 not connected
<3>[ 2.027132] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.027315] qup_i2c qup_i2c.12: I2C slave addr:0x18 not connected
<3>[ 2.027407] bma250_ic_write: error code = -107.
<3>[ 2.027559] bma250_power_up: Force power doen due to not read bypass status.

<3>[ 2.027651] bma250_power_up: Force power down.(bypass check error)
<4>[ 2.027834] bma250: probe of 12-0018 failed with error -107
<4>[ 2.027956] i2c-core: driver [bma250] using legacy suspend method
<4>[ 2.028109] i2c-core: driver [bma250] using legacy resume method
<3>[ 2.028780] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.028963] qup_i2c qup_i2c.12: I2C slave addr:0xc not connected
<3>[ 2.029146] akm8972 12-000c: aki2c_rxdata: transfer failed.
<3>[ 2.029238] akm8972 12-000c: akecs_checkdevice: Can not read WIA.
<4>[ 2.029391] akm8972: probe of 12-000c failed with error -5
<3>[ 2.030123] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.030276] qup_i2c qup_i2c.12: I2C slave addr:0x54 not connected
<3>[ 2.030398] apds9702 12-0054: i2c_smbus write failed, -107
<3>[ 2.042636] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.042759] qup_i2c qup_i2c.12: I2C slave addr:0x54 not connected
<3>[ 2.042911] apds9702 12-0054: i2c_smbus write failed, -107
<3>[ 2.062627] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.062810] qup_i2c qup_i2c.12: I2C slave addr:0x54 not connected
<3>[ 2.062902] apds9702 12-0054: i2c_smbus write failed, -107
<3>[ 2.082588] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.082801] qup_i2c qup_i2c.12: I2C slave addr:0x54 not connected
<3>[ 2.082893] apds9702 12-0054: i2c_smbus write failed, -107
<3>[ 2.102609] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
<3>[ 2.102731] qup_i2c qup_i2c.12: I2C slave addr:0x54 not connected
<3>[ 2.102914] apds9702 12-0054: i2c_smbus write failed, -107
<3>[ 2.122966] apds9702 12-0054: apds9702_probe: device not responding error = -5
<3>[ 2.123149] apds9702 12-0054: apds9702_probe: device create failed.
<6>[ 2.124401] using rtc device, pm8xxx_rtc, for alarms
<6>[ 2.124584] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
<6>[ 2.125041] i2c /dev entries driver
<6>[ 2.125774] lirc_dev: IR Remote Control driver registered, major 238
<6>[ 2.125866] IR NEC protocol handler initialized
<6>[ 2.126049] IR RC5(x) protocol handler initialized
<6>[ 2.126110] IR RC6 protocol handler initialized
<6>[ 2.126293] IR JVC protocol handler initialized
<6>[ 2.126354] IR Sony protocol handler initialized
<6>[ 2.126445] IR RC5 (streamzap) protocol handler initialized
<6>[ 2.126598] IR LIRC bridge handler initialized
<6>[ 2.126690] Linux video capture interface: v2.00
<6>[ 2.152174] pm8xxx_tm_probe: OK
<6>[ 2.153212] device-mapper: uevent: version 1.0.3
<6>[ 2.153700] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 2.154158] cpuidle: using governor ladder
<6>[ 2.154249] cpuidle: using governor menu
<6>[ 2.154860] mmc0: mci-version: 18
<6>[ 2.156630] mmc0: bam physical base=0x12402000
<6>[ 2.156722] mmc0: bam virtual base=0xe18b0000
<6>[ 2.156874] mmc0: BAM device registered. bam_handle=0xdf9e7800
<6>[ 2.157088] sps:REVISION of BAM 0xe18b0000 is 0x5.
<6>[ 2.157546] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
<6>[ 2.157637] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
<3>[ 2.157851] mmc0: No card detect facilities available
<6>[ 2.158370] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
<6>[ 2.158553] mmc0: 8 bit data mode enabled
<6>[ 2.158614] mmc0: 4 bit data mode disabled
<6>[ 2.158797] mmc0: polling status mode disabled
<6>[ 2.158950] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
<6>[ 2.159102] mmc0: Slot eject status = 0
<6>[ 2.159194] mmc0: Power save feature enable = 1
<6>[ 2.159255] mmc0: SPS-BAM data transfer mode available
<6>[ 2.159560] mmc1: mci-version: 18
<6>[ 2.161422] mmc1: bam physical base=0x12182000
<6>[ 2.161513] mmc1: bam virtual base=0xe18bc000
<6>[ 2.161696] mmc1: BAM device registered. bam_handle=0xdf9e7e00
<6>[ 2.161880] sps:REVISION of BAM 0xe18bc000 is 0x5.
<6>[ 2.162368] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
<6>[ 2.162490] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
<6>[ 2.163222] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
<6>[ 2.163375] mmc1: 8 bit data mode disabled
<6>[ 2.163467] mmc1: 4 bit data mode enabled
<6>[ 2.163558] mmc1: polling status mode disabled
<6>[ 2.163711] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
<6>[ 2.163802] mmc1: Slot eject status = 1
<6>[ 2.163955] mmc1: Power save feature enable = 1
<6>[ 2.164047] mmc1: SPS-BAM data transfer mode available
<6>[ 2.167343] usbcore: registered new interface driver usbhid
<6>[ 2.167495] usbhid: USB HID core driver
<6>[ 2.168075] logger: created 256K log 'log_main'
<6>[ 2.168350] logger: created 256K log 'log_events'
<6>[ 2.168564] logger: created 256K log 'log_radio'
<6>[ 2.168747] logger: created 256K log 'log_system'
<6>[ 2.170151] usbcore: registered new interface driver snd-usb-audio
<6>[ 2.172714] msm_pcm_probe: dev name msm-voip-dsp
<6>[ 2.173569] msm_pcm_probe: dev name msm-pcm-dsp
<6>[ 2.173905] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
<6>[ 2.174790] msm_compr_probe: dev name msm-compr-dsp
<6>[ 2.175156] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<3>[ 2.175400] msm_soc_platform_init
<6>[ 2.175644] msm_afe_probe: dev name msm-pcm-afe
<3>[ 2.176896] msm_audio_init: Not the right machine type
<3>[ 2.177475] msm_afe_afe_probe
<6>[ 2.263818] asoc: null-codec-dai <-> MultiMedia1 mapping ok
<6>[ 2.270441] asoc: null-codec-dai <-> MultiMedia2 mapping ok
<6>[ 2.275507] mmc0: new high speed DDR MMC card at address 0001
<6>[ 2.276148] mmcblk0: mmc0:0001 M8G2FB 7.28 GiB
<6>[ 2.279841] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
<6>[ 2.284663] msm_sdc3_set_mpp04: Enable uSD card Load SW
<6>[ 2.287562] asoc: null-codec-dai <-> CS-VOICE mapping ok
<6>[ 2.294094] asoc: null-codec-dai <-> VoIP mapping ok
<6>[ 2.300686] asoc: null-codec-dai <-> MultiMedia3 mapping ok
<6>[ 2.307248] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
<6>[ 2.312620] msm_sdc3_set_mpp04: Disable uSD card Load SW
<6>[ 2.317381] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
<3>[ 2.323912] msm_asoc_pcm_new
<6>[ 2.324065] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
<3>[ 2.330566] msm_asoc_pcm_new
<6>[ 2.330657] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
<6>[ 2.337311] asoc: null-codec-dai <-> MultiMedia4 mapping ok
<6>[ 2.343873] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
<6>[ 2.350465] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok
<6>[ 2.357088] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
<6>[ 2.363680] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
<6>[ 2.370181] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
<6>[ 2.376773] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
<6>[ 2.383305] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
<6>[ 2.389897] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
<6>[ 2.396429] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
<6>[ 2.402960] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
<6>[ 2.409461] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
<6>[ 2.416053] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
<6>[ 2.422615] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
<6>[ 2.429177] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
<6>[ 2.443583] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
<6>[ 2.451152] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
<6>[ 2.451793] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input4
<6>[ 2.452250] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input5
<6>[ 2.456554] ALSA device list:
<6>[ 2.456645] #0: msm8960-snd-card
<6>[ 2.456920] GACT probability NOT on
<6>[ 2.457012] Mirror/redirect action on
<6>[ 2.457103] u32 classifier
<6>[ 2.457195] Actions configured
<6>[ 2.457347] Netfilter messages via NETLINK v0.30.
<6>[ 2.457500] nf_conntrack version 0.5.0 (10761 buckets, 43044 max)
<6>[ 2.459331] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.459484] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.459636] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.460186] xt_time: kernel timezone is -0000
<6>[ 2.464794] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.465099] arp_tables: (C) 2002 David S. Miller
<6>[ 2.465313] TCP cubic registered
<6>[ 2.465405] Initializing XFRM netlink socket
<6>[ 2.466412] NET: Registered protocol family 10
<6>[ 2.496444] Mobile IPv6
<6>[ 2.496566] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.497054] IPv6 over IPv4 tunneling driver
<6>[ 2.503403] NET: Registered protocol family 17
<6>[ 2.503525] NET: Registered protocol family 15
<6>[ 2.503891] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.504074] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.504166] Bluetooth: RFCOMM ver 1.11
<6>[ 2.504318] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.504410] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.504562] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.504806] NET: Registered protocol family 35
<6>[ 2.505173] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 0
<5>[ 2.505386] Registering SWP/SWPB emulation handler
<6>[ 2.517533] clock_late_init() disabled 198 unused clocks
<6>[ 2.524126] simple_remote simple_remote: **** Registering (headset) driver
<6>[ 2.524462] input: simple_remote as /devices/virtual/input/input6
<6>[ 2.524736] input: simple_remote_appkey as /devices/virtual/input/input7
<6>[ 2.524919] simple_remote simple_remote: ***** Successfully registered
<6>[ 2.524980] simple_remote_pf simple_remote_pf: Successfully registered
<6>[ 2.529314] MSM Watchdog Initialized
<6>[ 2.534625] mhl_sii_setup_power(on): success
<6>[ 2.534716] mhl_sii_setup_gpio
<6>[ 2.534869] MHL: mhl device (sii8334) registered
<3>[ 2.742163] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.742316] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.742377] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.742469] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.742591] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.742652] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.742804] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.742896] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.742987] mhl_sii_reg_read: i2c_transfer failed (-107)
<6>[ 2.743048] mhl_sii_device_init: ffff (ff)
<3>[ 2.743201] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.743293] qup_i2c qup_i2c.10: I2C slave addr:0x3d not connected
<3>[ 2.743384] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.743506] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.743628] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.743689] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.743842] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.743903] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.744025] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.744117] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.744269] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.744330] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.744452] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.744605] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.744666] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.744819] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.744880] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.745002] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.745093] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.745215] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.745276] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.745429] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.745521] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.745612] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.745734] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.745856] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.745948] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.746070] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.746192] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.746253] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.746406] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.746467] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.746589] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.746680] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.746802] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.746894] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.747016] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.747108] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.747230] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.747321] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.747443] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.747565] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.747657] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.747779] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.747840] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.747993] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.748084] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.748206] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.748298] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.748420] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.748481] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.748634] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.748725] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.748817] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.748939] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.749061] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.749153] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.749275] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.749397] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.749458] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.749610] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.749671] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.749793] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.749885] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.750007] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.750068] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.750221] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.750343] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.750404] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.750556] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.750648] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.750770] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.750862] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.750984] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.751045] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.751197] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.751289] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.751381] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.751503] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.751625] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.751686] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.751777] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.751899] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.751960] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.752113] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.752205] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.752327] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.752418] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.752540] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.752601] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.752754] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.752846] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.752937] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.753059] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.753181] qup_i2c qup_i2c.10: I2C slave addr:0x49 not connected
<3>[ 2.753273] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.753395] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.753517] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.753578] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.753731] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.753792] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.753914] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.754005] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.754158] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.754219] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.754372] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.754433] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.754555] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.754646] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.754768] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.754890] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.754982] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.755104] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.755165] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.755318] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.755409] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.755501] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.755623] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.755745] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.755806] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.755959] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.756020] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.756142] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.756294] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.756355] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.756477] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.756569] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.756691] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.756783] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.756905] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.756996] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.757118] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.757210] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.757332] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.757393] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.757546] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.757668] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.757729] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.757881] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.757973] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.758065] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.758187] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.758309] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.758370] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.858538] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.858599] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.858721] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.858812] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.858934] qup_i2c qup_i2c.10: I2C slave addr:0x39 not connected
<3>[ 2.859026] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.859117] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.859240] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.859301] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.859453] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.859545] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.859636] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.859758] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.859880] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.859942] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.860094] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.860155] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.860277] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.860369] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.860491] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.860613] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.860705] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.860857] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.860918] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.861071] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.861132] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.861254] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.861345] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.861468] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.861529] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.861681] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.861773] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.861864] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.861986] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.862108] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.862200] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.862322] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.862444] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.862505] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.862658] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.862719] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.862841] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.862933] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.863055] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.863146] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.863299] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.863360] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.863482] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.863634] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.863696] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.863818] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.863909] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.864031] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.864092] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.864245] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.864336] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.864428] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.864550] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.864672] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.864733] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.864886] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.865008] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.865069] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.865222] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.865313] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.865405] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.865527] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.865649] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.865710] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.865862] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.865924] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.866046] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.866137] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.866259] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.866381] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.866473] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.866595] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.866656] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.866809] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.866900] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.867022] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.867114] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.867236] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.867297] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.867450] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.867511] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.867633] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.867724] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.867877] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.867968] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.868090] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.868213] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.868274] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.868426] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.868487] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.868609] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.868701] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.868823] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.868884] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.869037] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.869128] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.869220] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.869342] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.869464] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.869586] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.869678] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.869800] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.869861] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.870013] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.870105] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.870196] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.870318] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.870441] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.870502] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.870654] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.870715] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.870776] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.870929] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.871020] qup_i2c qup_i2c.10: I2C slave addr:0x64 not connected
<3>[ 2.871112] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.871234] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.871356] qup_i2c qup_i2c.10: I2C slave addr:0x4d not connected
<3>[ 2.871417] mhl_sii_reg_write: i2c_transfer failed (-107)
<3>[ 2.922142] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.922234] qup_i2c qup_i2c.10: I2C slave addr:0x3d not connected
<3>[ 2.922325] mhl_sii_reg_read: i2c_transfer failed (-107)
<3>[ 2.922447] qup_i2c qup_i2c.10: QUP: I2C status flags :0x1300c8, irq:224
<3>[ 2.922569] qup_i2c qup_i2c.10: I2C slave addr:0x3d not connected
<3>[ 2.922630] mhl_sii_reg_write: i2c_transfer failed (-107)
<4>[ 2.922905] i2c-core: driver [sii8334] using legacy suspend method
<4>[ 2.922966] i2c-core: driver [sii8334] using legacy resume method
<6>[ 2.923180] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1971-01-14 12:46:50 UTC (32705210)
<3>[ 2.985258] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
<3>[ 2.985350] qup_i2c qup_i2c.4: I2C slave addr:0x52 not connected
<3>[ 2.985441] semc_sensor_main 4-001a: semc_cam_i2c_read: i2c transfer failed
<3>[ 2.985563] semc_sensor_main 4-001a: semc_eeprom_load: eeprom i2c read fail -5
<3>[ 2.985624] semc_sensor_main 4-001a: semc_sensor_i2c_probe: eeprom load fail
<3>[ 2.985716] semc_sensor_main 4-001a: semc_sensor_i2c_probe: semc_sensor_main_i2c_probe failed
<3>[ 2.985960] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
<3>[ 2.986021] qup_i2c qup_i2c.4: I2C slave addr:0x0 not connected
<3>[ 2.986143] semc_sensor_main 4-001a: semc_cam_i2c_write: i2c transfer failed
<4>[ 3.112955] semc_sensor_main: probe of 4-001a failed with error -5
<3>[ 3.317564] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
<3>[ 3.317625] qup_i2c qup_i2c.4: I2C slave addr:0x48 not connected
<3>[ 3.317747] semc_sensor_sub 4-0048: semc_cam_i2c_read: i2c transfer failed
<3>[ 3.317869] semc_sensor_sub 4-0048: semc_eeprom_load: i2c read faile
<3>[ 3.317930] semc_sensor_sub 4-0048: semc_sensor_i2c_probe: eeprom load fail
<3>[ 3.318022] semc_sensor_sub 4-0048: semc_sensor_i2c_probe: semc_sensor_sub_i2c_probe failed
<4>[ 3.320921] semc_sensor_sub: probe of 4-0048 failed with error -5
<3>[ 3.321867] read_ocv_trim: program rev reg is 0x49
<6>[ 3.326537] pm8921_bms_probe: OK battery_capacity_at_boot=20 volt = 3707460 ocv = 3743499
<3>[ 3.329772] power_supply usb: driver failed to report `present' property
<3>[ 3.329925] power_supply usb: driver failed to report `present' property
<3>[ 3.330047] power_supply pm8921-dc: driver failed to report `present' property
<3>[ 3.330169] power_supply pm8921-dc: driver failed to report `present' property
<6>[ 3.339081] PMIC: BSV init complete
<6>[ 3.339783] msm_otg msm_otg: USB in low power mode
<6>[ 3.341217] update_temp_state: temp = 620, new condition = 4
<6>[ 3.341309] set_heartbeat_update_interval: set new heartbeat interval: 30000ms
<4>[ 3.343842] Warning: unable to open an initial console.
<6>[ 3.344544] Freeing init memory: 992K
<3>[ 3.448924] android_usb: already disabled
<3>[ 3.449473] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 3.450694] android_usb: already disabled
<6>[ 3.452006] adb_open
<6>[ 3.452098] adb_bind_config
<3>[ 3.512406] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
<6>[ 4.012604] mipi_renesas_r63306 mipi_renesas_r63306.0: ECO MODE OFF
<3>[ 4.102640] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
<6>[ 4.386662] msm_battery_gauge_alarm_notify: trip of high threshold
<6>[ 4.602716] mipi_renesas_r63306 mipi_renesas_r63306.0: ECO MODE OFF
<3>[ 4.867816] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already enabled
<3>[ 4.869281] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already disabled
<3>[ 5.122783] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already enabled
<3>[ 5.124217] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already disabled
<6>[ 5.353120] EXT4-fs (mmcblk0p25): recovery complete
<6>[ 5.357149] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<3>[ 5.382847] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already enabled
<3>[ 5.384343] simple_remote_pf simple_remote_pf: simple_remote_pf_enable_hp_amp - HP Amp already disabled
<6>[ 5.523027] simple_remote simple_remote: Headset
<6>[ 14.829421] msm_otg msm_otg: USB exited from low power mode
<6>[ 14.829543] msm_otg msm_otg: OTG_STATE_B_IDLE state
<6>[ 15.472821] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
<6>[ 15.472943] msm_otg msm_otg: OTG_STATE_B_IDLE state
<6>[ 15.476178] msm_hsusb msm_hsusb: vbus online
<6>[ 15.603601] msm_hsusb msm_hsusb: reset
<6>[ 15.603967] android_work: did not send uevent (0 0 (null))
<6>[ 15.714207] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 15.717686] msm_hsusb msm_hsusb: reset
<6>[ 15.718052] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 15.846177] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 15.848283] android_usb gadget: high speed config #1: android
<6>[ 15.848405] msm_otg msm_otg: Avail curr from USB = 500
<6>[ 15.902823] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 34.086128] check_soc_and_resume: soc is under resume_soc
<4>[ 44.742682] adbd (115): /proc/115/oom_adj is deprecated, please use /proc/115/oom_score_adj instead.