Muchas gracias compi. Dejo aviso para los compañeros
@franjhv y
@JDesing , a ver si nos pueden dar una orientación y echarle un vistazo. Según parece hay alguna forma de anular el micrófono de cancelación de ruido en algunas apps. Lo expuesto en ese hilo hace referencia a este otro (
enlace) en el que se lograría esta anulación haciendo unas "simples" modificiaciones , para el que sepa del tema
, sobre el fichero de "audio_platform_info.xml" en /system/etc que en principio serían éstas:
<?xml version="1.0" encoding="ISO-8859-1"?>
<audio_platform_info>
<acdb_ids>
<device name="SND_DEVICE_IN_CAMCORDER_MIC" acdb_id="89"/>
</acdb_ids>
<backend_names>
</backend_names>
<config_params>
</config_params>
</audio_platform_info>
Según parece lo preparado por ese usuario del 3S es un fichero con extensión sh así que no sé si se podría estudiar el tema y adaptarlo para el RN4 SD625.
Por lo que leo, también se ha conseguido sobre la línea Redmi 4 con estos cambios. Fuente:
4PDA Dejo la info traducida del Ruso al Ingles para no desvirtuar más la traducción del ruso.
instructions:
0. Need
Root.
1. Open the file /system/etc/audio_platform_info.xml
Under the line <acdb_ids> add this:
<device name = "SND_DEVICE_IN_HANDSET_MIC" acdb_id = " 1" />
<device name = "SND_DEVICE_IN_HANDSET_STEREO_DMIC" acdb_id = "1" />
2. Save
3. If necessary, expose the right of the letter "D"
4. Reboot
Increase the volume
En el
redmi 4A sería con el
mixer_paths_qrd_sku2.xml
instruction:
volume Up
0. Need Root.
1. Open the file /system/etc/mixer_paths_mtp.xml
Locate the lines:
<path name = "handset-the mic">
<path name = "ADC1" />
<ctl name = "IIR1 INP1 the MUX" of value = "DEC1" />
</ path>
2. prescribes new volume values:
<path name = "handset-the mic">
<path name = "ADC1" />
<ctl name = "IIR1 INP1 the MUX" of value = "DEC1" />
<ctl name = "DEC1 the Volume" of value = "96" />
<ctl name = "DEC2 Volume" value = " 96" />
</ path>
3. Find the line:
<path name = "handset-stereo-DMIC-ef">
<path name = "speaker-DMIC-endfire" />
</ path>
4. prescribes new volume values:
<path name = "handset-stereo-DMIC-ef">
<path name = "speaker-DMIC-endfire" />
<ctl name = "DEC1 the Volume" of value = "96" />
<ctl name = "DEC2 the Volume" value = "96" />
</ path>
5. Save
6. If necessary, expose the right to "G"
7. Reboot
Increase bitrate video track
you can also change the bit rate track. By default, it is trimmed to 96kbps. By changing a single line of the bit rate can be increased up to 156kbps.
instructions:
increasing bitrate video track
0. Need Root.
1. Open the file /system/etc/media_profiles.xml
In
the end we find a column codec aac:
<AudioEncoderCap name = "aac" the enabled = "to true"
minBitRate = "8000" maxBitRate = "96000"
minSampleRate = "8000" maxSampleRate = "48000"
minChannels = "1" maxChannels = "6" />
2. Change maxBitRate the desired, for example to 128,000 (for 128kbps):
<AudioEncoderCap name = "aac" the enabled = "to true"
minBitRate = "8000" maxBitRate = "128000"
minSampleRate = "8000" maxSampleRate = "48000"
minChannels = "1" maxChannels = "6" />
or 156,000 (for 156kbps)
<AudioEncoderCap name = "aac" the enabled = "to true"
minBitRate = "8000" maxBitRate = "156000"
minSampleRate = "8000" maxSampleRate = "48000"
minChannels = "1" maxChannels = "6" />
3. Save
4. If necessary, expose the right "D"
5. Reboot