Jiayu S3 Brick

DaviidCou

Simdualero de Bronce
Mensajes
24
Puntos
690
No se cuanta gente quedará por este subforo.

Estoy intentando resucitar mi Jiayu S3 3GB 16GB y no hay manera.

Intento flashear la ROM RC5 de aquí pero siempre me salta algún error.

S_DL_WRITE_PT_FAIL
S_FT_ENABLE_DRAM_FAIL

He probado de todas las combinaciones de versiones de flash tools, windows/linux, pulsando Vol+, Vol- o Power, solo boot, solo recovery, todo seleccionado, formatear primero, format+download, download, firmware upgrade...

Y no hay manera, el móvil llevaba como 6+ años apagado, lo tuve cargando una horas, lo encendí y se quedo parado en el logo, quite la batería porque no apagaba y ya no ha vuelto a encender.

Lo tiro o tiene arreglo?
Estoy dispuesto a probar cualquier cosa, así que si queréis que pruebe X opción, pulsando Y botón y con Z versión de SPFT pues se dice. A peor no puedo ir.

Alguna info del SP Flash Tools (v5.2032):
Captura de pantalla de 2022-01-27 17-15-25.png


Chip Info:
Chip Name: MT6752
Chip Version: 0x0000ca01
Ext Clock: EXT_26M
Extern RAM Type: DRAM
Extern RAM Size: 0x80000000
SRAM Size: 0x00020000

EMMC Flash:

Boot1 Size: 0x400000
Boot2 Size: 0x400000
RPMB Size: 0x400000
GP1 Size: 0x0
GP2 Size 0x0
GP3 Size: 0x0
GP4 Size: 0x0
UA Size: 0x3a3e00000

Memory Test
============ Memory Detection Report ===========



Internal RAM:





External RAM:



Type = DRAM



Size = 0x80000000 (2048MB/16384Mb)



NAND Flash:



ERROR: NAND Flash was not detected!



EMMC:



EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)

EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)

EMMC_PART_RPMB Size = 0x0000000000400000(4MB)

EMMC_PART_GP1 Size = 0x0000000000000000(0MB)

EMMC_PART_GP2 Size = 0x0000000000000000(0MB)

EMMC_PART_GP3 Size = 0x0000000000000000(0MB)

EMMC_PART_GP4 Size = 0x0000000000000000(0MB)

EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)



UFS:



ERROR: UFS was not detected!



============ RAM Test ============



Data Bus Test:



[D0]

[D1]

[D2]

[D3]

[D4]

[D5]

[D6]

[D7]

[D8]

[D9]

[D10]

[D11]

[D12]

[D13]

[D14]

[D15]

[D16]

[D17]

[D18]

[D19]

[D20]

[D21]

[D22]

[D23]

[D24]

[D25]

[D26]

[D27]

[D28]

[D29]

[D30]

[D31]

OK!!



Address Bus Test:



[A1]

[A2]

[A3]

[A4]

[A5]

[A6]

[A7]

[A8]

[A9]

[A10]

[A11]

[A12]

[A13]

[A14]

[A15]

[A16]

[A17]

[A18]

[A19]

[A20]

[A21]

[A22]

[A23]

[A24]

[A25]

[A26]

[A27]

[A28]

[A29]

[A30]

OK!!



RAM Pattern Test :

Writing ...

0x44332211,


0xA5A5A5A5,

0xA5A5A500,

0xA500A500,

0xA5000000,

0x00000000,

0xFFFF0000,

0xFFFFFFFF,

OK!!



Increment/Decrement Test:

Writing...

OK!!

Scatter File:
Código:
############################################################################################################

#

#  General Setting

#   

############################################################################################################

- general: MTK_PLATFORM_CFG

  info:

    - config_version: V1.1.2

      platform: MT6752

      project: h560

      storage: EMMC

      boot_channel: MSDC_0

      block_size: 0x20000

############################################################################################################

#

#  Layout Setting

#

############################################################################################################

- partition_index: SYS0

  partition_name: preloader

  file_name: preloader_h560.bin

  is_download: true

  type: SV5_BL_BIN

  linear_start_addr: 0x0

  physical_start_addr: 0x0

  partition_size: 0x40000

  region: EMMC_BOOT_1

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: BOOTLOADERS

  reserve: 0x00


- partition_index: SYS1

  partition_name: pgpt

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x0

  physical_start_addr: 0x0

  partition_size: 0x80000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS2

  partition_name: proinfo

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x80000

  physical_start_addr: 0x80000

  partition_size: 0x300000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: PROTECTED

  reserve: 0x00


- partition_index: SYS3

  partition_name: nvram

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x380000

  physical_start_addr: 0x380000

  partition_size: 0x500000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: BINREGION

  reserve: 0x00


- partition_index: SYS4

  partition_name: protect1

  file_name: NONE

  is_download: false

  type: EXT4_IMG

  linear_start_addr: 0x880000

  physical_start_addr: 0x880000

  partition_size: 0xa00000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: PROTECTED

  reserve: 0x00


- partition_index: SYS5

  partition_name: protect2

  file_name: NONE

  is_download: false

  type: EXT4_IMG

  linear_start_addr: 0x1280000

  physical_start_addr: 0x1280000

  partition_size: 0xa00000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: PROTECTED

  reserve: 0x00


- partition_index: SYS6

  partition_name: seccfg

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x1c80000

  physical_start_addr: 0x1c80000

  partition_size: 0x40000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS7

  partition_name: lk

  file_name: lk.bin

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x1cc0000

  physical_start_addr: 0x1cc0000

  partition_size: 0x60000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS8

  partition_name: boot

  file_name: boot.img

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x1d20000

  physical_start_addr: 0x1d20000

  partition_size: 0x1000000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS9

  partition_name: recovery

  file_name: recovery.img

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x2d20000

  physical_start_addr: 0x2d20000

  partition_size: 0x1000000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS10

  partition_name: secro

  file_name: secro.img

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x3d20000

  physical_start_addr: 0x3d20000

  partition_size: 0x600000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS11

  partition_name: para

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x4320000

  physical_start_addr: 0x4320000

  partition_size: 0x80000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS12

  partition_name: logo

  file_name: logo.bin

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x43a0000

  physical_start_addr: 0x43a0000

  partition_size: 0x800000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS13

  partition_name: expdb

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x4ba0000

  physical_start_addr: 0x4ba0000

  partition_size: 0xa00000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS14

  partition_name: frp

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x55a0000

  physical_start_addr: 0x55a0000

  partition_size: 0x100000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS15

  partition_name: tee1

  file_name: trustzone.bin

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x56a0000

  physical_start_addr: 0x56a0000

  partition_size: 0x500000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS16

  partition_name: tee2

  file_name: trustzone.bin

  is_download: true

  type: NORMAL_ROM

  linear_start_addr: 0x5ba0000

  physical_start_addr: 0x5ba0000

  partition_size: 0x500000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS17

  partition_name: metadata

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0x60a0000

  physical_start_addr: 0x60a0000

  partition_size: 0x2760000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: INVISIBLE

  reserve: 0x00


- partition_index: SYS18

  partition_name: system

  file_name: system.img

  is_download: true

  type: EXT4_IMG

  linear_start_addr: 0x8800000

  physical_start_addr: 0x8800000

  partition_size: 0x80000000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS19

  partition_name: cache

  file_name: cache.img

  is_download: true

  type: EXT4_IMG

  linear_start_addr: 0x88800000

  physical_start_addr: 0x88800000

  partition_size: 0x1a800000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS20

  partition_name: userdata

  file_name: userdata.img

  is_download: true

  type: EXT4_IMG

  linear_start_addr: 0xa3000000

  physical_start_addr: 0xa3000000

  partition_size: 0x60000000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: true

  is_reserved: false

  operation_type: UPDATE

  reserve: 0x00


- partition_index: SYS21

  partition_name: flashinfo

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0xFFFF0084

  physical_start_addr: 0xFFFF0084

  partition_size: 0x1000000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: false

  is_reserved: true

  operation_type: RESERVED

  reserve: 0x00


- partition_index: SYS22

  partition_name: sgpt

  file_name: NONE

  is_download: false

  type: NORMAL_ROM

  linear_start_addr: 0xFFFF0004

  physical_start_addr: 0xFFFF0004

  partition_size: 0x80000

  region: EMMC_USER

  storage: HW_STORAGE_EMMC

  boundary_check: false

  is_reserved: true

  operation_type: RESERVED

  reserve: 0x00
 
Es difícil saber que puede pasar porque después de tanto tiempo parado puede tener algún fallo de hardware. Algo en la placa base o incluso que la batería no tenga la carga necesaria.

Pero como bien dices peor no va estar, por lo que podrías probar con otras roms para flashtools. En el foro hay varias. Son más antiguas que la RC5, pero lo importante es ver si instala y arranca. Podrías hasta probar con alguna kitkat. Al cambiar el tipo de particiones debe hacerse con la opción firmware upgrade
 
Nada, he probado con MP_mt6752_h560_s3_jyt_cc_kk_lte_5m-cs_tphone_20150117-172407PC y me da ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

Lo mas lejos que llego es un 4008 cuando hago "Download Only" (KK y RC5)

Edit: Tendré que abrir el móvil a ver si esta todo bien por dentro, alguna guía?
 
Última edición:
Nada, he probado con MP_mt6752_h560_s3_jyt_cc_kk_lte_5m-cs_tphone_20150117-172407PC y me da ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

Lo mas lejos que llego es un 4008 cuando hago "Download Only" (KK y RC5)

Edit: Tendré que abrir el móvil a ver si esta todo bien por dentro, alguna guía?
El error que te marca FT es bastante habitual y puede ser por varios motivos. Sin ir más lejos porque no estén bien instalados los drivers MTK en el PC.

El móvil carga?. Se enciende el Led?

Lo reconoce el pc al conectar el USB y da el típico sonido?
 
El error que te marca FT es bastante habitual y puede ser por varios motivos. Sin ir más lejos porque no estén bien instalados los drivers MTK en el PC.

El móvil carga?. Se enciende el Led?

Lo reconoce el pc al conectar el USB y da el típico sonido?

No enciende el led (encendió la primera vez que lo cargué, cuando lo encendí y quedo atascado en el logo)
No se si carga, cargo la batería con un cargador externo.

Si lo conecto al PC si que hace los sonidos de detectarlo.

GECft17.png


Así me sale en Windows 10, drivers instalados con la verificacion de firma desactivada.
En Ubuntu no instalé ningún driver, pero el Flash Tools me da los mismos errores.

Otro programa que he usado es el Miracle Box:
Al hacer MTK > Service > readInfo:
Código:
Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:18-07-12
  Connected OK.
  Expire date:
  Miracle Thunder More Faster More Powerfull !
  Check Authentication...
  Check the new version.
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM Port (COM33)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
>>Circuit bad

Primera vez que me salen las 3 ultimas lineas... (No me han vuelto a salir despues de 5 pruebas)

Y ahora he hecho MTK > Service > Read
Y parece que esta leyendo, cosa que no me había hecho antes...
A ver donde acaba la cosa.


Edit: Aquí

Código:
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x80000000
  File Mode: C:\Users\David\Downloads\MTK6752_1906012154.bin
  Reading(EMMC)...(0xA3E00000)
  SUM ERR:00000000
>>File save to:C:\Users\David\Downloads\MTK6752_1906012154.bin
 
Última edición:
No enciende el led (encendió la primera vez que lo cargué, cuando lo encendí y quedo atascado en el logo)
No se si carga, cargo la batería con un cargador externo.

Si lo conecto al PC si que hace los sonidos de detectarlo.

GECft17.png


Así me sale en Windows 10, drivers instalados con la verificacion de firma desactivada.
En Ubuntu no instalé ningún driver, pero el Flash Tools me da los mismos errores.

Otro programa que he usado es el Miracle Box:
Al hacer MTK > Service > readInfo:
Código:
Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:18-07-12
  Connected OK.
  Expire date:
  Miracle Thunder More Faster More Powerfull !
  Check Authentication...
  Check the new version.
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM Port (COM33)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
>>Circuit bad

Primera vez que me salen las 3 ultimas lineas... (No me han vuelto a salir despues de 5 pruebas)

Y ahora he hecho MTK > Service > Read
Y parece que esta leyendo, cosa que no me había hecho antes...
A ver donde acaba la cosa.


Edit: Aquí

Código:
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x80000000
  File Mode: C:\Users\David\Downloads\MTK6752_1906012154.bin
  Reading(EMMC)...(0xA3E00000)
  SUM ERR:00000000
>>File save to:C:\Users\David\Downloads\MTK6752_1906012154.bin
Los drivers MTK no están bien instalados. La señal lo indica.

En el foro tenemos drivers MTK que han funcionado bien. El consejo es eliminar y volver a instalar con otros. O probar en otro pc.
 
No enciende el led (encendió la primera vez que lo cargué, cuando lo encendí y quedo atascado en el logo)
No se si carga, cargo la batería con un cargador externo.

Si lo conecto al PC si que hace los sonidos de detectarlo.

GECft17.png


Así me sale en Windows 10, drivers instalados con la verificacion de firma desactivada.
En Ubuntu no instalé ningún driver, pero el Flash Tools me da los mismos errores.

Otro programa que he usado es el Miracle Box:
Al hacer MTK > Service > readInfo:
Código:
Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:18-07-12
  Connected OK.
  Expire date:
  Miracle Thunder More Faster More Powerfull !
  Check Authentication...
  Check the new version.
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM Port (COM33)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
>>Circuit bad

Primera vez que me salen las 3 ultimas lineas... (No me han vuelto a salir despues de 5 pruebas)

Y ahora he hecho MTK > Service > Read
Y parece que esta leyendo, cosa que no me había hecho antes...
A ver donde acaba la cosa.


Edit: Aquí

Código:
  Connected to Phone.
  CPU: MT6752 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x80000000
  File Mode: C:\Users\David\Downloads\MTK6752_1906012154.bin
  Reading(EMMC)...(0xA3E00000)
  SUM ERR:00000000
>>File save to:C:\Users\David\Downloads\MTK6752_1906012154.bin
@SIgNIFER tiene razon, los drivers Preload,que son los que se usan con flashtools, no estan bien instalados, por eso te sale en triangulo.
Primero, soluciona el problema con los drivers, y despues, yo te recomendaria usar Flashtools desde una carpeta en el escritorio y no desde la carpeta descargas y supongo que ya lo haces, pero solo conectar el cable usb, una vez iniciado el proceso en flashtools, nunca antes de pulsar el boton.
Espero que con tantas pruebas, no hayas perdido la Nran y el imei
 
Los drivers MTK no están bien instalados. La señal lo indica.

En el foro tenemos drivers MTK que han funcionado bien. El consejo es eliminar y volver a instalar con otros. O probar en otro pc.

@SIgNIFER tiene razon, los drivers Preload,que son los que se usan con flashtools, no estan bien instalados, por eso te sale en triangulo.
Primero, soluciona el problema con los drivers, y despues, yo te recomendaria usar Flashtools desde una carpeta en el escritorio y no desde la carpeta descargas y supongo que ya lo haces, pero solo conectar el cable usb, una vez iniciado el proceso en flashtools, nunca antes de pulsar el boton.
Espero que con tantas pruebas, no hayas perdido la Nran y el imei


He seleccionado los del triangulito amarillo (Que pensaba que era por no estar firmado) y los he desinstalado.

Sin hacer nada mas ahora me sale así.

Y3ixb3n.png


Aunque el USBDeview no inspira confianza.

0zm6GVs.png


El IMEI lo tengo detrás de la bateria, así que creo que aunque lo pierda no tendría problema.
La NVRAM, ni idea.

Voy a borrar drivers otra vez y a instalar.
Luego empezaré a hacer pruebas.

Para quien le pueda servir:
Muchas versiones de Flash Tools

Y la clave
Contenido oculto
Necesitas responder a este tema o reaccionar a este post para ver el contenido.
En principio son de spflashtools.com
 
He seleccionado los del triangulito amarillo (Que pensaba que era por no estar firmado) y los he desinstalado.

Sin hacer nada mas ahora me sale así.

Y3ixb3n.png


Aunque el USBDeview no inspira confianza.

0zm6GVs.png


El IMEI lo tengo detrás de la bateria, así que creo que aunque lo pierda no tendría problema.
La NVRAM, ni idea.

Voy a borrar drivers otra vez y a instalar.
Luego empezaré a hacer pruebas.

Para quien le pueda servir:
Muchas versiones de Flash Tools

Y la clave [Contenido oculto]

En principio son de spflashtools.com
Si usas el buscador del foro te mostrará el hilo con los drivers MTK VCOM. Son los que mejor han funcionado con el Jiayu S3
 
Si usas el buscador del foro te mostrará el hilo con los drivers MTK VCOM. Son los que mejor han funcionado con el Jiayu S3
Vale, he seguido este post y todo parece correcto.

Voy a reiniciar y a probar versiones, el Jiayu S3 no había que pulsar nada al enchufar el cable, no?

Edit:
  • Fotmat+Download
    • S_DA_SDMMC_WRITE_FAILED (3149)
  • Firmware Update
    • ERROR_PMT_UNAVAILABLE (proinfo: Failed to get PMT info)
  • Download Only
    • Download Boot Loader 0% (Y de aquí no pasa)
    • S_FT_DOWNLOAD_FAIL (4008)
  • Format
    • Auto Format + Whole Flash
      • S_DA_SDMMC_WRITE_FAILED (3149)
    • Auto Format + Whole Flash except Bootloader
      • S_DA_SDMMC_CONFIG_FAILED (3147)
 
Última edición:
Vale, he seguido este post y todo parece correcto.

Voy a reiniciar y a probar versiones, el Jiayu S3 no había que pulsar nada al enchufar el cable, no?

Edit:
  • Fotmat+Download
    • S_DA_SDMMC_WRITE_FAILED (3149)
  • Firmware Update
    • ERROR_PMT_UNAVAILABLE (proinfo: Failed to get PMT info)
  • Download Only
    • Download Boot Loader 0% (Y de aquí no pasa)
    • S_FT_DOWNLOAD_FAIL (4008)
  • Format
    • Auto Format + Whole Flash
      • S_DA_SDMMC_WRITE_FAILED (3149)
    • Auto Format + Whole Flash except Bootloader
      • S_DA_SDMMC_CONFIG_FAILED (3147)
Hace mucho que no uso flashtools pero para el Jiayu S3 (su SoC es antiguo) sólo manejamos la segunda y la tercera opción de fllaheo. La primera la descartamos porque traia problemas. Y la de format ni existía en las versiones que usábamos entre 2015 y 2018.
 
Aqui tienes el tutorial,miratelo bien.
Revisa las versiones de flashtool y busca alguna mas antigua.
Revisa los drivers, conectando el movil apagado al pc y usando el tutorial.
Carga la bateria al 100% antes de volver a hacer el proceso.
La rom rc1 era la mejor para hacer eso, no dices que rom tenias antes.
Con la opcion format+download se perdian los imeis,aunque los tengas en la caja, el problema es que se corrompe la particion Nram y por eso da muchos problemas.
Mas no te puedo ayudar por que hace años que no uso FT
 

Del blog

Es tendencia

¿Ha terminado la locura de añadir tantas cámaras a los móviles?

  • Si

  • No

  • No lo se

  • Ya me gustaría...

  • Ya te gustaría...


Los resultados solo son visibles tras votar.
Atrás
Arriba